Search results

Good spotting, and you are 50% right. The pattern is the same, but the angle the picture was shot is different so it's not easy to see the pattern. There is an arc on some of the spokes due to that the nipples just where thigtend by hand when the picture was taken Br Geir

Thank you for positive comments, it is much aprichiated I sent the pictures to The Bike Shed this sunday, and look what happend yesterday: http://thebikeshed.cc/wp-content/uploads/2012/07/FRAMING-TX.jpg I have been told that story behind it is going to be published later also. Big smiles...

Thank you Ryan. If the RR discs and brake caliper does not stop this little thing I am out of ideas ;) I think it looks good with twin discs and the spoke wheel:

Spacers for the RR discs on the Gs 400 hub. There is only one disc originally, but both sides of the hub had threads for a disc. Now it is bolt on

Gs 400 at sunset

I have also startet polishing the engine covers and freshing them up with new Suzuki emblems, and the brown colour on the RR legs are history

First colour out on the tank and seat was white, and another colour will be applied when I have decided what to go for....

I relaced the wheels with new spokes. I like the look with black rims and new spokes

After test fitting the bike were tore down for powder painting the frame etc. It was -20c outside then, so the kitchen was the place to keep the parts for display for å couple of days. Oh happieness, and my girlfriend felt the same

Test fitting of the seat after adjustments,Aprillia rear sets,exhaust etc.

Seat tubes cut, and holes filled in.

Thank you for the warm welcome Jorgen. I have come a little bit further than this initial pictures Here is a couple of more of the front end. The discs is just hanging there at this moment. I used the original Gs stem with the RR front. That way I could also use original Gs bearings

First seat fitting before cutting the seat tubes/frame. As you can se I had already swapped the stock front at this time. I wanted to upgrade the stock single disc, and the front mounted came from a 93 Cbr 900RR

Hi, and welcome to my project I bought the bike as a project that had fallen asleep. It was not complete, but all the main components was included in the deal. At least if you don't count the electrical system in as a main component Pick up day:

My own tank badge :)

Hi This is my first post on this forum. Short intro: After work hours I enjoy garagetime and working on motorcycles. I was looking for a affordable project when this 97 Seven Fifty came up online. It had a history of beeing a bike from a traffic school, and had some minor battlescar's from...