Search results

Hi All For a couple of months now I have been on the search for a performance cam for the 125/150 Ace. After some failed attempts sourcing out of China, I finally had success out of Brazil. For those that aren't aware, there is quite an aftermarket scene for the CG125 based bikes in Brazil...

Hi All I have a weird problem with my carb. I swapped out the pilot jet and went to retune the mixture. The carb is a Molkt 26mm with an air screw. All was fine before I swapped the jet. I can stall the idle by richening the mix but when I lean it out beyond 1 turn out i get no response...

Hey Guys I'm look for some guidance with selecting a pilot jet size. I'm tuning a CG clone motor and with an aftermarket carb. I currently have a #25 pilot jet (original #17.5) in the carb and to tune for best idle I have the AIR screw turned out about 3/4 turns. From what I understand, the...

So I've been thinking of making a brat seat for the Ace and started on a very budget project. Its started with a trip to KMART where I saw a junior skateboard while shopping with my kid. Surprise surprise, it happened to be the same width as the frame rails of the Ace. Juices flowing, I...

G'day Folks I finally pulled my finger out and registered so I thought I'd introduce myself. It's great to see how far this community has come. Last time I visited it was nothing but a couple of threads... now you guys have your own section! Anyhoo, I'm in Western Sydney and I bought my...