Search results

Good thinking. I will double check and make sure those vents are clean. I know the petcock works perfect when not connected to carb. Sent from my E6853 using DO THE TON mobile app

Im pulling my hair out with this one. Its seems like a simple problem, but after cleaning and rebuilding my carbs (Keihin 3D), the float bowls will not fill with gas. They are bone dry. the carbs inside are spotless, no gunk, and i can blow air in the fuel inlet, as well as slides working...

I'll look I to this. thank you Sent from my E6853 using DO THE TON mobile app

Hey Everyone, As i live in Toronto, Ontario it is fairly hard to find some older parts. most are in the states and not only do i pay more after the conversion to american dollars, but most times when things ship to me, i get charged taxes and duties and tax on that again. Its a real pain owning...

So if there ever was an overflow in the bowl it will just drip on the hot engine? Sent from my E6853 using DO THE TON mobile app

Standpipe is fine. Never was anything wrong with it. But there is no way to connect a drainage tube to the bottom of the float bowl. Sent from my E6853 using DO THE TON mobile app

I ended up hooking them up to a drill And holding them against a file to add a chamfer to the inside edge. They fit great now, thank you for your suggestions. I'll post photos soon. Still no solution on the overflow drainage hole though. Sent from my SM-N910W8 using DO THE TON mobile app

They are keihin model 3D carbs. I can't find any. Right now I'm resorting to sanding down the caps of the new plugs I bought. Sent from my SM-N910W8 using DO THE TON mobile app

Hello everyone. I'm having a hell of a time rebuilding my 1969 honda cb350 keihin 3d carbs. More specificall... Most drain plugs I find online have this larger diameter head that hits the body of the float bowl before screwing in. Anyone run into this issue before? I can't seem to find the...