Search results

Its pritty simple and straightforward. Took my cl360 engine apart, cleaned and ready for assembly in total of 3 ish hrs. hrs. With a basic set of spckets and a ratchet, oh and a runber malet to split the cases.

Very jealous, dream bike/first bike was a 80 cb750f never got a title for it even tho i had every peice of paper work the dmv told me id need, hope all goes well finding good people to ride with!

Ill have to run out after nephews birthday party and pick some up, wasnt sure is the ultra gray was still an rtv substances, at nissan we just get handed a tube of grey rtv nissan brand. And seen what that can do to engines first hand when the just timing chain recall cameout. Techs put to...

Fallowing the build, and the shirts , im wondering the same for wheel bearings as well.

Aswell as some cleaning this weekend. Hoping to get the 2 halfs back together, with that said any recs on sealent, hondabond/yamabond. I already know do not use rtv, read alot and mamy people say many things , have a yamaha store down the street, and a parts store up the hill, just looking for...

Re: CB360 Parts Whats the bronze bushings? Possibly mufflers if available

Ive mixed and matched.i bought carb kits from common-motor last year. Kits wernt exact but has idle and slow jets that were factory spec but they came with 100 instead of 110s so i Cleaned out my 110 jets like bootsey said and carb dip, didnt have any guitar strings but did have bread-ties and...

Ah yes. Keep her busy for a while, should have thought of that myself [emoji106] .

For the matting surface of the head. I have scartch brite. Didnt want to take the chance to have acutal damage to the surface, thats the plan for thes weekend scotch bright the matting areas and clean the actual 2 halfs of the case. Only if the g.f. leaves me alone for a few hours

Ha no thankgod. Its actually a peice of dog hair. Dogs wete outside all day and playing i was tgrowing the toys n scartching them. And must have blow on to the head.

So today finally got some time for the 360 set up a jank setup for my soda blaster and cabnit (hf special) pulled the vavles oyt of my *good head* cleaned up nicely. Took the advice went out for some 1000 grit sandpaper, and some 10w40 for cleaning up the journals for the cam, didnt want to...

Whats the title. Tried the search under buy and sell didnt come up

How much ?

Got my soda blaster set up. Tried it out on my old garbage head. Did a good job. Anything i should not do when useing the soda? Chambers om my old one came out nice.trying to take evety precaution before i do my "good head"

Ya sloght difference ha. But i figured if it works then great. Ha

Carb boots next pay check ordering from common. I ment tge difference in the heads. How one has the round body (new purchase) (ment the old head has tge boots on for refference to which i was comparing sorry) compared to the old cl head. Dont think it will be an issue but figured id ask. Going...

I just realized this. The heads are slightly different from the one i bought to the one i removed, i dont think it will be an issue. Onr i bought is without the boots,any thought

I have a damaged head the metal surface on the middle was basically destoyed , i ended up buying a used one on ebay for about 45 bucks, im taking irk miller advice and polishing the newer ones journals. Picked up an nos rocker cover for 80 and 2 good shape rockers for 30ish to replace my bad...

Ladt few days went parts shopping. Ordered some new guides on ebay off a member here ordered .25 piston set for 70 bucks on ebay brand new nos. Trying to figure what jetting i should starg with. Garentee theres still alot of stuff i need to buy