Search results

  1. H

    Successful 81 exciter 250 cdi ignition box rebuild

    I figured out it was my ignition box based off another thread where the guy (and me) had problems with his bike cutting in and out from idle to mid range. It usually got better when fully warm but it was still a problem. Capacitors usually do this when they absorb moisture, they are as good as...
  2. H

    Sr250 Cdi aftermarket?

    It's probably fine. The egg diode is just a standard zener diode. You can replace it with one from radio shack. As for the caps get the exact same ones
  3. H

    Sr250 Cdi aftermarket?

    http://www.dotheton.com/forum/index.php?topic=71764.0 Check my thread I just replaced the capacitors and now my ignition box works again.
  4. H

    Successful 81 exciter 250 cdi ignition box rebuild

    My CDI went bad. I started getting popping and intermittent throttle on accel. So I took a deemed to the CDI plastic case and what I found was pretty cool. The mother board a couple capacitors diodes and resistors. Since Diodes and resistors usually don't go bad I went straight for the...
  5. H

    WTB Exciter 250 ignition unit

    Type T1D 11-02 3y6 Looking for one at a fair price. Thanks!
  6. H

    Exciter 250 does this now... (video)

    https://youtu.be/VFiroTL33z4 So the other night I was doing a burn out to waste the 5 year old tire and it just stopped running right after that. Now I have to give it a solid 4 minutes to warm up before riding it. The video says it all (40 seconds) I checked for air leaks, there is a new...
Back
Top Bottom