Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Is the vacuum port plugged? Maybe that's your problem. I know I've forgotten to plug it on occasion with similar symptoms on my kz650. Can't tell from your pics or video.
A good sharpie followed by trial and error might work well.
I've also taken that same style nut off of my kz650 with the blunt end of a punch and a hammer. That didn't mar the nut too much, only cosmetic.
Here's a pic of the tool I made for the 2nd gen SV. This is a 1-1/4" deep socket from ace...
I took a deep socket long enough to reach and the proper size, then went at it with a dremel to make my own. Takes time, but only cost about 20 bucks and about an hour. Make sure you file those burrs off so you don't scratch that soft aluminum nut. Doesn't hurt to pad it with some tape either. I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
