Search results

I have lifted my tank 35mm at the back, just cut of the tank mount and extented it with flat steel to lift the platform the tank is resting on Sent from my iPad using DO THE TON

I have searched the web for some weeks now, no luck other than extension pipes for the upper part of the fork, but cost 400 usd + tax and shipping. So that is a no go Sent from my iPad using DO THE TON

I have 40mm travel from the tire to the engine/ exhaust. Do some of you know if its possible to put a machanical stopper inside the usd forks to have a security of knowing its impossible that this can happend under a powerful brake down

Great work[emoji1308] Sent from my iPad using DO THE TON

After spending 4 hours looking on the bike with different angles on the seatpan [emoji848]+ your guys feedback i have landed on cafe look[emoji41] i have also been fantasising of makeing a new frame based on boxed stainless steel, but that has to wait to later, i want the bike up and going this...

Welding finished Sent from my iPad using DO THE TON

Hi, im currently building a virago cafe racer. The frame and engine is 1983 TR1 The suspension front and rear is from a 02 yamaha R1 The wheels are from a 96 virago 750: Front rim is 19" and rare is 15" My problem: My front tire is going to hit the engine if i hit the front brake hard since i...

Taking my hat off nice work Sent from my iPad using DO THE TON

I have also been working on the subframe, but im stil not convinced to go for the corbin seat vs cafe style I would really appriciate some feedback from the community Sub frame Cafe pros: + can hide all electronics and battery inside the seat + more agressive driving position, i...

Electronics, Important to keep things tidy and organized Sent from my iPad using DO THE TON

Nice, ill be following this one [emoji1305] Sent from my iPad using DO THE TON

That i have not checked yet since i not have front brakes connected. I have been worried about that, so i have a coupple of zx400 they are about 40mm longer. So that is my plan B Sent from my iPad using DO THE TON

That was my original plan, i have very little experience with fiber glass. But evrything can be learned, cool suggestion you made, nice shape Sent from my iPad using DO THE TON

Thanks [emoji3] Sent from my iPad using DO THE TON

Playing around in Photoshop and i think this sulution with a cafe tail look cool. I would love some input from you guys, since this is the next step in the process Sent from my iPad using DO THE TON

Rebuilding the startermotor. Had a short shaft type laying around. And the current startermotor i have on the bike (long type) was very bad with rotten wires The new one hade some spacers i added to the new setup. Just because i have seen some repair kits that have them included Sent from my...

I am so fustrated right now, just received the "new" idler gear i bought from ebay and discovered i have been hustled, the gear was in original packaging, but the gear was very torn This is my current gear vs the new i bought Sent from my iPad using DO THE TON

I know guys, next time wear gloves when burning off the tank [emoji847] Sent from my iPad using DO THE TON

Had the frame off to do some welding on the frame, needed to weld a good mount for the R1 rear shock Sent from my iPad using DO THE TON

I have welded a cover for the tank end. The plan is to weld a little bolt with a small hole and use a splint lock. Also going to paint or polish the cover, i just need to mock up things first Sent from my iPad using DO THE TON