Search results

I know there are numerous threads regarding aftermarket starter buttons, but I can't seem to find one that fits my application. I have a 1976 CB360 with, from what I can tell, a right hand switch from one of the previous years based on the fact that it has the headlight on/off switch. I broke...

Trying to eradicate the gremlins from my CB360. Currently, the right front blinker does not work. Running lights work on both sides, and both rear blinkers and left front turn signal work as well. Tried a couple of bulbs in the right turn signal assembly to rule out one of the dual filaments...

As I was going to adjust my tappet clearances, I found that the left hand intake tappet screw is missing. I know it was in there originally when I got the bike because this is my second go around with adjusting them. I have yet to perform a compression test, and figured if I'm going to remove...

Just realized today as I was looking at some carb bodies I cannibalized to rebuild one carb that I seem to have mixed carb #'s. Essentially, I have assembled the carb on my CB360 with a 754A on the right and a 745B on the left. Didn't even think to check this before purchasing and using. Does...

Working on getting a 1976 CB360 road ready. The filters were shot, so I cut out the paper element and replaced it with UNI filter foam (60 PPI). Otherwise, the stock air boxes are unmodified. I first heard about doing this on one of the forums, but I'm not sure if the carb jetting was...