Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
On a painted motor does sanding and polishing the fin edges effect adhesion of paint on the flat surfaces?
I admit that while I did a good job degreasing I skimped a bit when it came to keying/scuff sanding every surface of the motor. Certainly between the fins was neglected.
I used a high...
I’m building a custom battery/under seat tray. I picked up polished stainless steel for the tray/fender and hardware of aluminum angle stock (angle iron) and rivets.
Then it hit me, dissimilar metals may cause aluminum corrosion.
The bike is stored outside under a cover. Should I expect the...
I’m building a bandit with custom seat cowl and nose. I find it hard imagining the outcome when the parts are all mismatched colors.
What would be a cheap easy way to try colors? And by colors I mean a silver or white just to get a rough idea?
Vinyl wrap? The compound curve tank will be...
I plan on having a small headlight fairing and either traditional incandescent or LED.
Is there any necessity for rubber mounting either the bracket in the fork leg or the headlight bucket to the bracket?
It’s an in-line 4 (Suzuki Bandit 600) so fairly smooth.
I’m cleaning up my bars and looking to go to an under tank choke cable pull “button”.
Are they tensioned? My choke has a pretty strong return spring. What have others done?
(It’s a 4 carb rack with a linked choke.. just need a standard cable end)
How would I go about filling these 2 5/16” holes?
JB Weld?
Epoxy?
Straight up bondo?
And I’m guessing I have to dimple the hole to give a little more surface area and be able to sand flush?
The larger opening needs to be left open to access the shock mount.
Thanks for any advice!
I messed up and took off too much material when grinding off frame tabs. Nothing terribly structural but I need to make it look nice before paint.
What are suitable options to smooth and how do I get tubing looking round again where it’s got some flats?
Do gas tanks need do be rubber mounted/isolated from the chassis for any reason?
I see my Bandit tank has rubber mounts front and at the rear not only is the tank rubber mounted, but the bracket the tank mounts to is also rubber cushioned (just on top)
See # 11, 12, 13
I'm removing the front fairing from a bandit and need to hide a bunch of harness plugs, relays, etc.
I'm thinking to go with an LED headlight. Is it possible to stuff the back of the headlight bucket with wires? Do they run hot (they build em with heat sinks, but they're nice and shallow).
I'm trying to decide on a gauge of stainless sheet to fabricate a new undertail. It will double as a fender of sorts.
What's the minimum to reduce or eliminate rock dings?
Such a cool little ride but a bit ratty.
Getting it onto my patio. The only thing scarier will be getting it back up.
Filthy! Road tar and asphalt bits packed behind the swingarm, looks like original plugs and air filter.
I've stripped the fork lowers and triple trees bare. Hardware is cleaned and wire wheeled of rust and corrosion.
I want to match the clear coated aluminum danmoto rearsets.
Is paint a decent option? I have an hvlp gun.
I've also read that gun-kote works great.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.