Search results

Hi, I was to put the dash indicator lights on my Kawasaki kz200. I don't have the 2 mounting screws but I can see that the part is"92012-005 Pair of NOS Kawasaki Kz200 Ignition Mounting Screws 2 Parts 1" There's plenty on eBay but I don't want to pay $20 Inc postage. Any way to find out what...

Hi, Yes, during the lesson the starter was used quite a few times so I think this would have pulled the voltage down. Then it was finished off by leaving the key on. I suspect the old lithium battery I was replacing was bad (it was 6+ years old and at 2.3Ah was undersized). This probably put...

Hi, Ok so I did some tests to check voltage and resistance. Resistance tests on regulator rectifier and stator check out in terms of the diodes are only conducting one way in rectifier and the the stator hasn't shorted. Voltage was as follows: Idle voltage (light on): 12.8V 4000rpm voltage...

Hi. So out today with the new battery. Starting on the electric start was so much better. I was teaching my girlfriend to ride and we had a lesson for about 1hr30. At the end of the lesson I went to start the bike and it was dead. No light on and wouldn't kick start. I did manage to push start...

Hi, Thanks for the advice. I ordered the anti gravity 4 cell AG-401 off Amazon and it arrived today. I put it on my charger then saw the instructions said only use a lithium charger so I took it off. Voltage was showing over 13v so I put it on the bike. Electric starter was so much better...

Hi, I got a used KZ200 Kawasaki which has been done cafe racer style. It came with the battery box removed and a small lithium battery under the seat. It's a 2.3AH one: It seems the company that makes this no longer exists. I think the battery is a few years old now and was struggling to...