Search results

I recently picked up a "stash" of SOHC CB750 parts and after inventorying them, I found that I had an extra set of carbs that aren't for SOHC motors. These are for the 79-81 DOHC CB750's and are stamped VB42A. I wanted to throw these out there to see if anyone would be interested in them...

If you've got an old rebuildable fork for a Cb350 lying around, give me a holler. The internal damper on my left fork has some pieces that aren't where they're supposed to be, so I'm looking for a replacement damper. Thanks for lookin' Joe

Running into a bit of a charging issue on the CB350 and thought I'd run it by the forum members. Initially started out with testing the rectifier, which failed the resistance tests. Inspection of the plastic "cage" around it showed that it had gotten hot enough to melt it where the cooling...

Just finished up cleaning the oil centrifuge on my CB350. I replaced both the cup oring and the 2 orings for the cover when re-assembling. Applied a light wiping of oil to the orings prior to reinstalling the cover and made sure to not force the cover back on. After running the bike a few...

Okay, I'm a bit worried about asking this question for fear of what the answers might be. But, perhaps I am just being paranoid that something is mechanical wrong inside my engine. Here goes. When you turn the engine over while setting the timing on a CB350 how much valve train noise should...

Gents, Not sure if you'd be interested, but I found a 20% discount at advanced auto parts online when ordering my K&N filters. Ended up paying only ~$51 for the RC-0412 for my CB350. Ordered them tuesday and they arrived yesterday. Here's the link...

After a day or two of work removing parts on my CL350 for cleaning/rebuilding/replacement, I wanted to start a project thread to share ideas and post some pictures. First, I want to mention something interesting I found when draining my tank to remove it. After disconnecting the fuel line to...

Looking for a front fender to fit the 73 CL350 project I'm working on. If you have a decent fender lying around gathering dust, let me know. Thanks!

Been browsing the forums here for a month or so while scouring the local craigslist for a viable first cafe project. As things turned out I scored a 73 CL350 just this past week and plan to spend the next few weeks going through the usual tune up and safety work. Replacing fuel lines, ignition...