Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I recently picked up three project bikes, two quite ratty (a CL100 and a CL350). As I am disassembling them to make slightly less ratty I am dropping all of the rusty nuts and bolts into evaporust to clean the rust off. I am trying to decide if black oxide treatment after that would take...
Thank you. I've generally had great results with POR-15. Budgets on these kind of projects escalate very fast and trying to keep it more DIY, I do love powdercoat. I will check out the Appliance Epoxy. Trying to decide how I will treat the current rust. I love evaporate, that will treat...
Reasonable. The lower mounting tab was broken off and I don't know how to tig weld yet. New lower case was suggested, but plastigauge is cheap insurance.
I went to a title place and got the title put into my name! The taxes/fees were more than the purchase of the parts/bike.
There is a well reviewed classic bike shop here in Austin named Limey Bikes. Chis is a British man in Texas. I stopped by his shop on Saturday and we had a visit about my...
Crazy, This post makes more and more sense the more I learn and read. I saw a video on youtube where I guy threaded the insert then put a bolt in it to extract it. I am looking at heads on ebay and there are a few decent looking ones, but you never know if you are just buying a different...
Irk, I ordered a reamer and a guide and might take a stab at it myself. I need to do a little research on the valve seats and how that are replaced just so I understand what I am dealing with. I like to think of the money I spend on this stuff as "Tuition" LOL. I have seen the seat cutters...
Thank you. I've talked to a local guy and going to stop by his shop on Saturday to look at the head and talk through the options. I appreciate the recommendation.
Thank you for the reply. I have lots of questions.
1.) The valve guide broke, if I replace the valve guide, do I have to replace the valve and the seat? Can I reuse the old valve ( I don't think the engine was work or smoking).
2.) is there a specialty reaming tool that you use to...
So the first problem I want to solve is the valve guide problem. Let me describe it a little better as I am not sure about the components after looking up valve guide parts for the CB at common motore. The spring seat snapped off from what I am calling the valve guide at the head, so the...
I am an older guy (born 1969) and I found a 1972 CB350 on FB marketplace. It came with a title (which I just transferred) The young man (mid-late 30's) had purchased a running cb350 and wanted to learn on it, so he took it apart and had the case bead blasted, but other projects took priority...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.