Search results

Okay guys, on the chop that i am building i'm going to be running a foot clutch and jockey shift set up. It is a 1979 kawasaki kz 750 twin, i have tc bros forward controls on it. Just looking for some pics or ideas on the best way to do this.

Im in need of a set of piston rings for both cylinders on my 1979 kawasaki kz 750 twin.

I bought this for my bike a few years ago but ended up swaping the motor out to a 1000cc. Its brand new and never been used http://www.ebay.com/itm/Brand-new-never-used-Kawasaki-KZ650-starter-/230889479681?pt=Motorcycles_Parts_Accessories&hash=item35c215de01&vxp=mtr

Hey guys and gals, im going to be painting the gas tank on my kawasaki 750 twin chopper. I was going to paint it in this order, primer, white base coat, duplicolor metal specks ocean blue, duplicolor clear metallic effex to give it more of a sparkle cause im going for a paint job out of the 60s...

This is the latest bike i bought, it is a 1980 Kawasaki kz1000 ltd. It has an 1115cc kit in the motor, 28mm z1 carbs, a hot set of cams, undercut trans and a falicon crank, and a cool looking set of old school 4 into 2 Jardine pipes. It has also had the smaller ltd tank swapped out for the...

Well ever since i got my new to me 1980 KZ1000 ltd the 750 twin went into the shop for a new transformation. I have always been a big fan of the old school hard tail chop look. Here is what i came up with so far. The swing arm is stretched 5 inches, back half of the frame has been lopped off...

I'm looking for a good 3 ohm green dyna coil for my 79 750 kawi twin. I have lots of parts to trade.

Okay, the wiring on my bike is a rats nest and id like to tidy it up a lot. I am at a complete standstill with wiring, i can tear down and rebuild all the rest of the stuff on a bike, but wiring throws me for a loop. The electric start is disconnected, but i would like to keep the gauges and...

I was wanting to eliminate the stock ignition switch on my 1979 kz750 twin. I was thinking about moving it under the seat or somewhere that it wasn't obvious. I was thinking about using a simple toggle switch. Has anybody done this before?

I was out riding today and i noticed the bike slowing down as i tried to accelerate < i looked down and seen the front caliper smoking so i pulled into a Mc donalds parking lot and the caliper was locked to the rotor. I let it cool down for about and hour and cracked the bleeder valve and...

I just picked up a 1979 Kawasaki KZ 750 twin with 11,500 miles not running for 500 bucks. I know it seems a little high but it is clean. I drug it to the shop, and found out it had no spark or fuel flow. Put in new plugs< cleaned the carburetors, and adjusted the points and times it, then i...