Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I ordered a RAD v-storm wheel with my GSXR 2004 front end. I sent them my axle and they machined everything to make everything mount up as it needs to- ALSO you need to get a 17" wheel for the spokes not to hit the calipers.
Cognito Cycles also has a hub they are selling to work with modern...
HI!
I am upgrading my CB750 front end to a GSXR front end- So I am selling a good amount of stuff off of the front.
I attached a photo of everything on the front end.
Top triple- good condition paid $130 for it I'd let it go for $75 its been on the bike for about a year- if that.
Link to...
Hey!
The cb750F starting in 75-78 (sohc years) came stock with a rear disc. Same swing arm set up as 69-78. I'm pretty sure you'd just need a cb750F rear wheel and the disc set up to run this rear disc. Also would have to find a spot to mount the master etc etc. I'm sure people have done it...
HI!
I am selling my carpy 4-1 exhaust ceramic coated silver. I have Tarozzi rear sets on my bike that make contact with the end of the exhuast so there are some small beat marks on the end of it.
I am asking for $325 OBO shipped in the USA. Exhaust was originally 350 shipped to me raw and I...
Ian at houseonfire.com took care of everything related to the seat. The owl has an oil tank built into it! So happy with it... I highly recommend his work. Very high quality and very affordable.
Heres my bike as of now... we all now we are never done....
The rearsets are tarozzi and were basically a direct bolt on... it took a bit to figure it all out exactly but I got there and then it was simple. Got them from fast from the past!
The Clip ons are from dime city...
76 Cb750 SS raw metal cafe.
That build basically inspired my entire build. I had my bike about half done then completely restarted after seeing that. Such a great looking machine. Nothing but respect for it.
I am going to bore the engine and put a high performance cam in it over the winter...
Been working slowly but surely on this for almost a year now. Here are some photos.
The oil tank is built into my seat and all of the electronics are relocated under the seat pan. The tricky part now is figuring out the full level without getting oil shot all over my face from the vent...
So it's been a while since I posted. Since last year I have done a ton of work and I am kicking myself in the ass for not making this a build thread. The bike is almost done. I had Ian at house on fire build me a steel seat with an oil tank built into the cowl. So along with that there's lots of...
the seat is sold.... taking offers on the light its about 4 inches across... I am trying to get 30 for it... or trade for some kind of headlight that would fit on a cb750
Hey everyone! I have been lurking this board for a long while now and I have finally embarked on a project of my own.... heres where I am at now!
and both of my bikes together at night
WISH ME LUCK!!!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.