Search results

Give Swifty's in Fort Worth a call. Great guys and great fun. 817-560-RACE (7223)

Ummm, I forgot to post Finished pics... Here ya go.

Fits right into the forward pucks, but sits low at the back. I built mine up with a block of wood under the tanks tail and strapped it down with hose clamps.

Next bike night will be July 27th. Couple af vintage projects on the racks including my new cafe racer. Gotta come check it out. May also have an announcement about a local build off. Should be cool!

Gonna be F'n sick dude. I like the Cobra paint scheme idea. Give me a call here at swifty's. I can help you out with the clubmans. Have a set here in stock. 817-560-7223

Cool. Hours are from 10 to 6 Mon - Friday 10 to 5 Sat. Eric is excitd to see all the cafe's and vintage bikes at this bike night. He is used to bike nights being dominated by modern sportbikes. He'll be in for a big surprise. BP give me a call at the shop and I'll get u a quote on those tires.

Thanks for the Props. No worries about missing the bike night. Maybe make it out for the one on the 29th.

So, my Buddy Eric decided to open his own motorcycle shop in Fort Worth. He will be selling parts and accesories and doing general maintenance. I am currently the mechanic there while he gets everything up and running, so don't be afraid to stop by and ask those off the wall questions that...

Actually I took the old foam off and refoamed it with som High dense foam I got from a local shop. I painted the pan and while it was still wet set the foam on it to see where I needed to trim for the recesses. Trimed it out with a razor blade, glued it down and covered it. Should have the...

Had the slides in on the wrong side. Had the cutout facing the engine. All is good now. Day 5 Pic. Still a little more to finish up. Wrap the pipes, wire headlight, and small details.

Floats are set at 21mm. I switched bowls and all is good. Now, I have an idle problem. Brass adjusters all the way in (no threads showing), idle screws at 4 rounds out, and idle mixture screw at alomost 2 rounds out and it wants to idle at 2800 rpms. No air leaks on manifolds (tested with...

HELP!!!!!! Left Side carb floats are hitting the bowl and not letting fuel in. Tried bending them a little (and I mean VERY little) to clear and they hit the housing them. Left side is fine, Any Suggestions?

Going Foward in Reverse. Had to take it apart to do the wiring. Exhaust, chain and other minor dtails today and it should be done. :)

Tank Graphics starting out day 3 of Vacation IMG_1303 by Crash13666, on Flickr

For a cb750, but this may help. just eliminate the wires to the starter and the solenoid.

Day Two of Vacation. Not alot done, but trying to take my time and do it right. Spent most of the day trying to decide if the Euro bars were going to work out for me. midge 040 by Crash13666, on Flickr

Started vacation and am going to try to finish this bike this week. Day 1 Progress. midge 015 by Crash13666, on Flickr

This scene was inspiration for one of my Earlier drawings

Had a few setbacks with painting the tank and am currently using the roller method as described elswhere on the forum. I have decide to take this bike more to a Brat than anything. Here is a rendering of the tank idea. The Kanjii says "Very Small" or Midget.

Re: CB200 '73 tracker project +1 Been dicking around with cleanup and paint and sand and polish for almost a month now just to have all the paint destroyed by using the wrong kind of clear (Epoxy vs laquer). A month wasted and all I have is a tore down bike.