Search results

is that a 4 or 500? i have a both there good motors

I think the 350 and 400s used the same carbs with different jetting

Pella area here welcome

So I have a bone stock 72 350f with a 400f header and shot reverse cone emgo just cleaned everything up and got it running starts and runs great other than a little midrange stumble from 4-5k. Carbs have stock jetting currently but this is midrange problem so I'm thing of moving the needels...

wanted cb 350 (not cl) tank in usable shape lease send pm or email spreeman_zimm@hotmail.com

Where can you get those "M" style bars looking for a set like that for my scrambler project

nice work in the oil tank cool build

tore into my 72 450 today to inspect the cams... they have some very light wear no real scoreing but all the timing chain and sprockets look good so i went ahead and pulled the head off because one side had 180 psi compression (cyl full of oil) the other i was not able to read. The threads on...

so i have seen a few kz twins with single carb set ups it there a reason the single carb works better on the kz400/440s? had anyone made it work on the Honda or Yamaha twins? i know the frame would be on the way on some bike like cb350s but you could work around that

it was a craigslist find its had a ruff life but clean title im stoked what do i need to know abouth the 450s i here there is a issue with the cam bearing wear? i would posr pics but it aint much to look at unless you like tall bars and a bitchin sissy-bar plans: full out cafe long term project

cool bike! i had a kawi 350 big horn, super fun bike with 4 stroke like low-end power but it was hard to find parts for

Re: Jake's 1973 XL250 "Brat-Tracker?¿" Build - UPDATED Dec. 24, 2010 (Picture Heavy) very cool where did you get the head light cover?

cleanest 350 ive ever seen just bitchin!

im havein the same problem with a buddys 350 running super ritch with new tood henning racing jeted 30mm carbs im goint to install new points and swap for a known good coils and go from there maybe get some new spark plug caps also check voltage at the coils

a few... cool thread

b and a

selling my bike to fund another take a look im starting high so make an offer http://desmoines.craigslist.org/mcy/1301344127.html thanks

chek out www.planetminis.com or dratv.com for speed parts for 50/70

105's to lean?

uni's and 2into1 cl pipes, 70-115 jets idels good rund good wide open checked all passages in carbs cleasn every thing rebuilt with new folats