Search results

I'll trade the complete front disc setup, master cylinder, caliper, wheel with disc... for a complete drum setup. I just want to switch to drum

Oh yeah! those look awesome man. Nice work!

how much for the front drum setup? rim and internals all in working order?

i was eating some tacos at the lucha bar, or whatever it is called, visiting from palm beach so i didn't have my bike. but i will for sure be back over there for a cruise. nice work on the bike, colors look great.

i was out in st. pete this last sunday night and saw you and some other bikes, a nice ass bobber, out at a mexican restaurant. nice little scene you guys have over there. sweet bikes, thats for sure.

Re: Complete CB175 partout - cb200 engine part out how much for the front wheel complete setup? actually the entire front brake system, levers, cables etc...

Radioshack

2 in paml beach

i have a cb360 with both side covers present. on one of the side covers, the left side, there is no rubber gromet to keep the side cover alligned on the frame. if anybody has one it owuld be greatly appreciated. my zip is 33487, please let me know.

nice. huge and upside down (shakes head and walks away)

here is my tank. i used a can of stripper from HD. it will naturally look old and crappy after letting it dry in the tank, after stripped. i used brilo pad and a bunch of wd40 on the top and front of the tank. the sides look good dirty. first pic so i hope its not huge. hope this helped.

i just did mine last weekend. a lot of paint stripper, wd40 and brillo pad. good luck.

good looking out. ;D

so I'm probably retarded but I have ran into a speed bump. I took my front wheel off for painting and my shop mate started activating the rake lever with the tim off. now the pads are pages together and I can't get them apart. I'm tired and probably looking into it further than I probably need...

yeah I know what ya mean. haha. thanks for the video. I watched that earlier today. my battery is shot. I'm tired. thanks again

i just got my tune up kit in from DCC and was wondering id the points can just bee screwed right on to replace the old ones. Do you have to time the new ones with compression or are they just plug and play. I was also wondering about installing new spark plug cables. Can they be fitted into the...

all of this is very helpfull thanks i will check them out tonight and let you guys know any results. thanks again. its strange because the day i got it it started right up first kick and ran smooth. it has no electric start either, not sure it that matters.

that is along the lines i was thinking. its refreshing to know im semi on the right track. i was thinking of getting the DCC 5.0 ohm Dyna ignition coils and there new plug wires.

thats what i was thinking. so that would prevent one of the plugs from sparking? thanks for any help

also, he bikeonly has 10,000 miles on it. everything else on the bike is stock, except the pod filterson the carbs. the carbs have been cleaned and tuned. thanks for helping the noob out.