Search results

Finished and sold this rephased xs650 last spring. Now I'm working on a 71' CB750. Picked it up for 400 bucks, not running. I got it running pretty quick, the ignition wiring was half assed at best. I ended up ordering a complete new optical ignition kit from cyclexchange. Eliminates the...

Just saw this on ebay, that front brake rotor makes me cringe. http://cgi.ebay.com/ebaymotors/1973-CB750-CAFE-RACER-ace-cafe-59-club-rocker-/260976943422?pt=US_motorcycles&hash=item3cc370213e#ht_1313wt_909

Ok fellas, I've been working on this for a couple months now. Its about 75% there, as of right now. 81 XS650 Special, 277 Rephase, Pamco ignition, XS Performance coils, completely rewired, starter delete, Mikuni VM34 carbs, Ascot 2-2 exhaust, bronze swing arm bushings, XS850 Special tank...

81 xs650 Special, It's still a work in progress, but here's what's been done so far: 277 Rephased crank / cam, Pamco ignition, XS Performance coils, Mikuni vm34 carbs, complete rewire, Ascot Street Tracker Exhaust, Medium seat from Cafeseat.com, clubman bars, a bunch of other small things I cant...

So I've noticed that my front wheel is closer to the left side fork (brake side) than the right. I measured the hub and that is centered between the forks as far as i can tell. I checked the spokes and sure enough the right side spokes were all semi loose. I tightened them up and it seemed to...

Will CL350 exhaust headers fit on a CB360? Im assuming the bracket may not work out, but do the pipes bolt up to the head correctly?

Here's my ride. It still needs a bunch of cleaning up and painting though.

Hey, I've got a CB500T with pod filters and open pipes. I'm having a problem with the rpms staying around 4k after i give it some throttle, it will stay around 4k for about 5-10 seconds and then come down to idle speed. Its idling fine and will rev fine all the way up to 10k but gets stuck...

Hey, I just got a 76' Cb500T , The front brake gets hung up on the rotor. I can still spin the wheel, but its definitely rubbing more than it should. I cleaned out the caliper and replaced the seal already. When I loosen the bleeder valve the piston is able to retract. I heard there is a small...