Search results

Right now I cant control the idle on my KZ. It races up to about 3,000rpm right after you start it. The only changes I made were pulling the float bowls off and changing just the main jets. Went from 97.5 to 107.5. I did not remove the carbs from the bike this time. While it is running I have...

I dont want to spend the money on some hagons or other known quality shock right now. Would anyone recommend these "monza" shocks from MikeXS? especially over RFY shocks? Something like these https://www.mikesxs.net/product/06-3643.html I also read on here the gold and black RFS shocks...

The lowers have been semi-polished and look pretty good. They do not appear to leak and I was told the oil has been replaced somewhat recently. The dust seals should be replaced. They are the shiny set in the pictures - not the nasty looking ones from my bike. I took pictures of the caliper...

I put a modern Nissin master clyinder and new braided lines on my bike. After nearly 6 hours of attempting to bleed them I am giving up. I feel like an idiot - Ive never had this much trouble. The bike is still in the standard configuration with the single line to the splitter and a line to...

I have a pair of gauges that came in a parts lot. They say drag specialties on them. Tach goes to 8k and the speedo goes to 140. They have the little mounting brackets and the chrome is a little messed up where they bolt on. Pretty good shape otherwise. They have a couple little scuffs and...

I have a set of PD carbs. They were ID'd by a member here when I posted asking about them. Told they fit CB400-550 around '76 and up? Check for whatever you would use them on. They came in a box of KZ parts and I have no use for them. Once of the overflow nipples is broken off but I have...

Going through the front brakes after I lost them while riding yesterday. I decided I dont want to deal with the factory master, splitter, multiple lines etc etc etc. I am thinking about doing a modern Nissin master clyinder 5/8" bore, double banjo bolt, seperate braided stainless lines to each...

I bought a whole lot of "KZ" parts off of a guy from Craigslist. A motor, multiple carbs, boxes full of stuff etc. This carb set was included. These are definitely not KZ carbs. I am thinking small Honda? Anyone help me out? I do have the broken overflow nipple. It was ducttaped to the carb...

hey thought i would throw out an intro not sure which way i want to head with my bike right now i bought it with a locked up motor and a bent swing arm. its been pieced together from junkyard bikes and i made the wiring harness, it isn't the greatest but it does what its supposed to do. I kept...