Search results

Sorry to raise this thread from the dead, but apparently my website got hacked a while ago. I switched all the pictures to my new host. Some updates: Bike didn't go on the road last summer because I was working out of California, where I picked up my new toy (back in Toronto now). I started...

Would you be willing to chop a part of the frame and ship it to me??? Shipping to Toronto, Canada... Here's what I need:

Thanks for the link, but the frames are not the same at all...

Hey guys, I decided that it's time to take my bike to a whole new level and just go completely custom. For this I need another CM400T frame (I still want to ride my bike day-to-day). I don't care if there is no title. Please let me know if you have one kicking around, I'll be able to come by...

Customfighters.com has a great thread that lists all the steering bearing sizes for various bikes: http://www.customfighters.com/forums/showthread.php?t=22068 CM400 stock bearings are: Upper: 26 x 48.5 x 15.2 Lower: 30 x 50 x 14.4 2008 GSXR are: Upper:30 x 55 x 17 Lower: 30 x 55 x 17 So...

Sure. The swap itself was pretty simple. The bottom bearing is the same 30x50, the new top bearing is 30x48.5. I ordered 2 new sets of bearings for a CM400, and machined the 30x50 down to 30x48.5. It's hardened steel, so you'll need a hardened bit to machine it down. Once the front end was on...

Re: (Not really) The slowest project ever - CM400T - OPINIONS WANTED ON P13! Sorry for being away from the forum for so long, first, to answer dcwp's question: no it doesn't show from the side except for the rectifier. Updates: I'm now running a 2008 GSXR front end on the bike. All the...

Hi, I'm selling my CM400T front end. Details: Tire - Kenda Challenger 110/90-18 500km on the tire (issue: would vibrate a bit, I don't think it's balanced properly) Wheel - stock, painted black Fender - included... Fork - recently rebuilt by Tony (500km after rebuild) Clip-ons - 33mm (got them...

Re: (Not really) The slowest project ever - CM400T - OPINIONS WANTED ON P13! So I got bored today, took out my soldering iron and fixed all my wiring at the back...Yes, I know the bike needs a wash... pictures: Soldering iron: Old wire shielding was corroded and torn, so I just replaced it...

Re: (Not really) The slowest project ever - CM400T - OPINIONS WANTED ON P13! Chopped some more: 5) 6) 7) 8)

Re: (Not really) The slowest project ever - CM400T - OPINIONS WANTED ON P13! Thank you all for your opinions, Dan, I might have to take you up on that offer! In the meantime, I'll try a lot more photoshops. I only had time to do 1 this morning, but I'll get a few more done during lunch...

Love your bike Dip, and your car =)

Re: GPZ 750 Project damn it-brakelines-seat painted- headlight with turn signals now This bike has such a great look to it! Keep up the good work!

Re: (Not really) The slowest project ever - CM400T - on the road! Thinking of a new tank and tail. Need advice. What do you guys think about these? 1. Stock tank - as it sits right now: 2. What if I fiberglassed the tank to give it edgier look? 3. What if I went with a GS750 tank, and...

Re: The Tortoise: cb350 04/17/10 DONE! Matt, Sorry to hear about your troubles this morning. Do you feel like you're reaching forward to far right now when you ride it? How does the seat feel after a 30km ride? Bike looks great!

Re: Slowest project ever - CM400T - yep... still not over. So, It's been long and painful, but very enjoyable, but she's on the road now! Fully insured, plated. Special thanks to Tony for picking my bike from very far away, taking it to his shop and tuning it! I was ripping around on it all...

Re: The Tortoise: cb350 wow you're funny looking (that's for forgetting to invite me over for the start) Glad you got it running!

Re: The Tortoise: cb350 Matt, I'll let you copy my flasher unit, total cost was $5 and works perfectly. I think I have all the extra resistors and relays to make 2 more units for you and dip as well.

Looking for a stock CM400 seat/seat pan. Don't care about the condition, as long as the seat pan is not completely rusted out. Need it to try a few more variations of the tail for my build. Price - as cheap as possible =) Location: it's too bulky to ship, so hopefully somewhere in Toronto or...

Very cool build! I absolutely love where you're going with it. Keep up the great work!