Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Quick question for the masses. I've eliminated my front signals on my 80 KZ750E cafe project. Is there any need to do anything other than cover the ends of the open wires?
Thanks in advance.
Sent from my iPhone using Tapatalk
It's been a while, but I'm pleased with the final overall shape. Still have some sanding to take care of the small low spots then ready for filler. Follows the lines of the frame well I think.
Sent from my iPhone using Tapatalk
Today, I laid some mat and cloth on the "lip" of the pan. Giving the seat some upward sweep on the tank when upholstered. The cloth laid down on the pan looks a little rough as I had a family emergency right in the middle of things. A little sanding etc will get it level and smooth.
Sent...
Okay. Got a mold made from the back half of my tank. As soon as it warms up a bit more, I'll lay the glass cloth inside of it to get a nice smooth plug.
Did a little massaging of the pan to get the right line along the frame. Next step is laying on the glass cloth to the pan to strengthen it up...
Thanks for the reply. I've been searching, but can't seem to find any posts, videos, etc. on the topic. Any recommendations on going forward? Making the cowl with the florist foam on the stock pan?
Thanks.
Has anyone done this? I'm planning the build of my seat for my 80 KZ750. I was thinking of using most the front portion of the seat pan with the seat lock, hinge points, and the stock rubber supports, and placing fiber glass over it to achieve my seat profile/cowl.
Any thoughts on this...
Been long time lurker and fan. I'm finally getting around to the intro. I'm elbows deep into my first cafe build, an 80 KZ750E. Mechanically sound, was a decent rider in it's stock form, but I can't leave well enough alone.
Thank in advance for all the info and inspiration.
Sam
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.