Search results

So I have a 77 kz650 that needs to be wired. This is a bare bones bike that only needs the headlight, tail light, coil, switch, reg/rec, battery wired. No turn signals, no horn, kick start only. I had it wired previously at a dealer, but decided to rebuild the bike and in the process moved back...

So I'm looking to go as low ass possible without running into rubbing issues on my 77 kz650. The bike has 13" eye to eye shocks stock. I have 2 5/8" clearance between the top of my tire (4.5x18) and the hoop. i'm not sure how much the rear suspension travels under load. this would be the million...

So I'm just finishing up the bike and I'm a little over my head with the electrical. Bikes a 77 kz650. Kickstart only, headlight, taillight, rectifier/regulator combo and that's it. No turn signals, no kill switch, no hi-low, none of it...only the essentials. I need someone to wire my bike up...

i picked up the nissin master cylinder for my kz650 and i'm trying to finalize my brake line order. i've decided to replace my dual lines (and splitter) with 1. this is what I came up with... 10x1.25mm Single bolt 35 inches in length (from MC to caliper) 0 degree banjo at MC 90 degree male...

I'm looking to chop up the stock exhaust on my 77 kz650 (4 into 2). the OD on the headers measures at 1.5". i have plans to replace the mufflers with the cone engineering reverse cone mufflers. the pipe diameter increases as it gets closer to the mufflers, so would i just order a muffler with a...

I just picked up a 77 kz650 last Tuesday. I'm "younger" than your average owner out there and I'm coming from a 07 gsxr600 that is setup for track only. I picked up this bike to learn a lot from and to get my first mini project going. The bike runs and is in pretty good mechanical shape; for...