Search results

stumbled onto this video https://www.youtube.com/watch?v=5RVOoNh4ICM

Have a 78 kz 400, (b1) I had ordered some new turn signals totally spaced out that the existing fronts were a dual filament bulb & socket and had ended up buying single filament ones, would like to try to have them function like a dual ? I know I could use them as turn signals only, but would...

Have a 78 kz 400, (b1) I had ordered some new turn signals totally spaced out that the fronts were a dual filament not a single filament like the rears, would prefer to still be able to have them function as a dual, I know I could use them as turn signal only but would like the running lights...

Have a 78 kz 400, front brakes just starts to grab on disc when pulling lever in then loses pressure, there is no leakage at master cyl or caliper, pulled master cyl cap fluid was lil low topped off, no change, then tried bleeding couple times, also had pulled caliper off and raised above the...

http://www.kz400.com/WorkshopManFrameset-5.html

Just put on a dragbar, cables end up with to many bends from the way they are routed with the extra slack in them causes the bends to be more severe (especially up top behind headlight), throttle wont return either ( did see the previous post with the clubman bars will try some of those...

Hey all, great site, somewhat of a noob, been a longtime since I played on a bike, I picked up this 78 kawasaki Kz 400 just a couple weeks ago, ordered lots of misc goodies to start converting to cafe style bike, looking forward to see how it progresses and comes together, lots of good stuff I...