Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I'm sort of stumped. This is my 4th 450, "all original" and I was told the engine was never out of the frame with 4k on the clock. Since I purchased it was very hard to start but ran strong when it got warm. I check and found that the right cylinder read 75psi while the left was 120 (carbs...
Never welded before, goal is to practice and learn to eventually weld my own frame mods and custom exhaust some day. I don't have the means to store gas bottles so I'm hoping to get suggestions on something (even if it means grinding down dirty welds later) I can learn on and be suitable for...
Took these off my bike, they work and are in perfect condition. One switch has 18" of wire the other closer to 24".
Retail is 146 each, I'm selling as a pair for $225 shipped.
Thanks
Has anyone done this:
My current project bike is a cb450 cafe racer, frame has been modified for rear hoop and tabs have been cut off. I have a stock frame that I wanted to use as a transplant for cafe racer parts to make near stock again...issue is one is titled and current and the other is...
Rode a total of ~3 hours right after I got this helmet, realized that I ordered an intermediate head shape when I'm full oval. Hits my forehead and gives me a headache. Comes with pinlock and bag (threw box away). 50% off MSRP.
Trying to get my tach to work. Its a Motogadget Chrono classic that has a digital signal pickup. The needle reads 9k when I'm at idle and I'm confident wiring is correct. I contacted Motogadget support and they said the issue is from electrical interference (like having satelite TV near power...
Have a Benjies tank that I want to add a fuel gauge to, toying with the idea of a sight tube on the side. Anyone think of a reason why it wouldn't be a good idea to drill/tap/seal some fittings directly in the fiberglass? Will it crack?
Had to cut ~1/2 inch off my kickstand to clear my rearset, now the bike leans over quite a bit when parked. Anyone know of extendable kickstands that fit our old bikes? Got a cb450
Need PN 22401-283-000, this is the skinny clutch spring that came on the 6 spring clutch baskets.
CMSNL has 5 left (bought them out)
David Silver Spares is out
Does anyone have a spare laying around they can sell me??
Pulled the engine on my cb450 after the oil started seeping from the cylinders somewhere. Found out it was from the base of the cylinders/engine case, the oil was soaking through the gasket from each cylinder equally. used a scraper to get the remaining gasket and found there were no burrs on...
Hey everyone, I ordered a BCR tank and seat combo for my cb450 project about a year ago. After finishing the project the bike saw the light of day which is when I realized under better lighting that the black stripes (over perfect silver base) were cracking. I'm not sure if this is a technique...
Amassing parts for my re-re-build, fixing all the things that I pushed under the rug first time around to get it on the road. One issue was a small weep from the cylinder head to cylinder mating. Bought a copper gasket and compared to an OEM, diameters are a bit different and not sure if will...
http://www.innovatemotorsports.com/products/dlg1.php
Gently used, everything still works. Had it on the bike for ~100 miles total.
Bought for 300 will sell for 150.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.