Search results

Hey guys So I rebuilt the master cylinder on my cb550 went to put bleed the system and noticed the brake fluid was not moving through the master cylinder. My re build was done correct and the re install was done in the correct order. Brake lines are new, the whole system is new. When I bought...

Hey guys. So I have a cb175 that I rebuilt the motor a while back, new seals, gaskets and piston rings. After getting it all back together i noticed white smoke coming out the pipes (burning oil). So I figured it could be a bad head gasket, valve seals, or rings. Turns out I did have a bad...

Hey guys, I Just rebuild my motor on my 70 cb175 a couple days ago, new piston rings seals and gaskets. Got the motor running and the left cylinder is blow a ton of white smoke. The smoke does have a fuel like smell and the plugs look normal. Any ideas on what might be up? All the searching...

Hey guys. So ive searched a ton and cant find the answer. Im tying to figure out what size piston rings I need for my 1970 cb175. Anyone able to help me out here? Thanks -Max

Hey guys. So I installed some roller bearings on my CB175 front end, everything seem to go together fine. When I took the bike for ride the other day I noticed some play in the front end when I would hit the front brakes. So I pulled the triple tree top off and made sure that I had everything...

Ran into a bizarre problem today with my turn signals. Just rewired my bike today (cb175) and after some trouble shooting and some ground issues i got all the lights to work, but could not get my turns to blink. What ever side i put the indicator on that corresponding side would just stay lit...

What oil weight are you guys running in you forks? Want to stiffen up my rebound a bit, any suggestions?

Ok so my tank has this red sludge that drips out. Its clogged the petcock pretty good, and Id like to find a way to clean it out before I go through the trouble of re-building my petcock. The tank was supposedly treated and I have a feeling it was either done wrong or I just need to flush it...

Hey guys. I plan on wrapping my CL pipes on my Cb175 and was wondering if anyone could tell me how many feet of thermal wrap thy used. Seems like 50ft should do the job, but im not sure. thanks for any help -Max

Any one ever white wall their tires....Im really liking the way this looks

Hey guys. Been on this site for a while now and finally got around to posting. Been working on my bike for a minute now and back and forth ideas this is what I have so far. Still need to blast the motor and hubs, and well as re-lace the wheels. Finished pounding my tank out, but still need...