Search results

Re: Aluminum 18" rims - 3.50, 2.75, 2.50, 2.15, 1.85, 36h & 40h, Akront & Borrani I think Honda’s are 36. I’m interested. Sent from my iPhone using Tapatalk

Max, can you confirm that the cl100 header will fit the cb125? Assuming if it fits the cl125, it should fit the cb125 too.

looking for scrambler exhaust

I'm interested too, and in wmass.

Looking for either!

looking for highway bars with footpegs

Sent PM

loooking for biltwell chumps or similar handlebars 7/8"

I'll take some photos. Not sure why the ignition would be rewired, it has the stock internally wired bars.

this is LENGTHS and diameters, the outer diameter list is on this forum and widely available elsewhere. took me a while to dig up this list of lengths.

Not gonna work, the 84 cb650sc has a model specific triple tree. People are suggesting using cb750/900 triples with the cb650sc 37mm tubes/wheel/dual brake, but those triples have a different stem bearing.

Found this info google cached in another forum, just putting it out there: HONDA Year Make Tube Length OD ID 75-79 GL1000 24" 37 29 73-80 CB750 K L A C 23" 35 26 75-79 CB750 F Supersport 23" 35 26 69-72 CB750 K1-K2 23" 35 26 79-80 CB650 C 23" 35 26 75-78 CB550 F Supersport 23" 35 26 74-78...

Re: 1974 b350 front end swap all questions i'm going to need to answer

Chicken you still got those highway bars?

no real reason here other than opportunity... both options are available locally. 1981 cm400 tubes (same fork tube diameter) 1984 cb650sc front end (Larger diameter tubes, dual disc, same steering stem bearing size) is the brake set up on either of these options worth the effort?

paging sonreir.. is he like candyman? sonreir sonreir sonreir

I looked at the diagram, i'm bad at reading them don't see the four way connector and my bike seems different... for example in the diagram the hot wires for the T/S are orange... mine are black and there is no evidence of tampering. The T/S ground through the mounting nut on the inside of the...

Took a look inside the headlight bucket to rewire my turn signals. There are three unconnected female ends, a brown wire, a green ground wire, and a black wire leading to a four way female connector with nothing connected to it. They're all coming from the main harness, not the controls. Anyone...

Looking for a turn/tail combo for my new cb350f. Found a few Honda options, want to keep it simple. Like what's on the cb650 and cb900. Any suggestions?

it's in there somewhere, just having trouble picturing where. Doesn't seem like it would fit in/around the valve spring or through the passage to the cam chain.