Search results

1973 CB350G parts: A good rear wheel (sprocket off) with pretty clean rims $75 plus shipping to be determined A pair of nearly new Uni-Filter $15 A good speedometer (odometer knob broken off) with speedo/tach bracket $15 Original stock coil with bracket $15 Various clean stock carb jets...

must be in good, usuable condition. don't really need the header pipes, just the exhaust. 714 968 1127 john or boomange@yahoo.com

my bike was running fine yesterday but it ran weak today. so i check the exhaust and feel only the left back-pressure and none on the right. so i checked further. there is spark and fuel flowing to both sides. wtf? compression test (cold) is 95psi on both sides. so what's the deal? what...

tell me what you've got and a number where i can reach you. will paypal. john 714-968-1127

i'm helping a friend with a cb350G twin. it ran when bought. we upgraded the coils, cleaned the carbs, new jets stock sizes, tune up, timed, new plugs, condensor, points, etc. here's the problem. the bike won't start and it'll backfire and white smoke will come out of the carbs. so i...

i have a 73' twin and would like to buy one. what are my options in fitting one properly. i dislike the light feel of the front end. any cb350 owners out there with pics of how they've mounted one? do i have to take the gators off in order to fit a 33mm fork clamp? will the clamp impede...

any list of torque numbers out there from the factory and such? what's the torque for the rear swingarm?

my left float bowl leaked gas after rides at the overflow vent valve (73' cb350G twin) so i swapped the left with the right to test out the bowl. now the leak is at the right. so i'd like to replace it with a good float bowl that won't leak. someone pm me if you have a good non-leaking carb...

here are my symptoms on my cb350. runs fine until the bike warms up then runs rich. also, backfires for just a sec and goes away and runs rich again. valves adjusted, new points, condensor, charged battery, timed with gun, new plug cap but stock coil. can someone link me on how to test...

i got the twin. i've been doing some research on site and don't see too many. any links out there for an upgrade from stock rear suspension? thanks JP

i've checked out the ebay supplier who sells LED bulbs that would replace the stock ones from my 1973 cb350 speedo and tach lights but there too many to choose from. would any BA9S LED bulb work? i need just 2 or 3. can someone link me the ones that'll work so i don't buy more parts that end...

i've cleaned and rebuilt the stock carb. adjusted the float gap to spec. after parking the bike from a good ride, the left carb drips fuel much more than the right from the bottom float bowl vent tube. what is causing this? JP

i have a clearance issue. the toe portion of the tarozzi rearset interferes with the muffler of my cb350 bike when it is mounted on the rear passenger's foot peg bracket, as some has suggested in bolting on. i have the alum universal rearset which did not come with a bracket. do i have to get...

from my 73' cb350g clean italian grandturismo grips $10 pair brand new chrome mirror fits all japanese bike threads $10 only got one center control (beam/turn/neutral indicator) in very good condition $20 stock factory rectifier clean and working $10 i'll let you know the shipping cost when...

i don't wanna get into the engine for more power and engine efficiency. and new mikuni carbs are too expensive and a hassle for me to plug chop. but 520 chain conversion sounds tempting. is it really what is cracks up to be? can anyone tell me their experience before and after the...

i pretty much understand the concept of a plug chop for main jet. now here's a question... let's say we check out our plugs after pulling into our garage after a normal ride. are the plug color showing the idle jet setting or a mixture of idle, needle, and main? JP

i have tarrozi rearsets i'm checking out right now and my foot size is average 10 but i'm a bit concerned about the toe to heel clearance of the universal aluminum tarozzi on the shifting side (brake side is not much concern here). is my concern legit or am i sweating it for nothing? any...

hey guys need help in a couple of things here. what is the best way to cut a couple of chain links for the final drive? i bought a new chain for my stock cb350g twin 1973. what was the original number of links anyway? the new one has more links so i'd like to know how many links to cut and...

i bought one from the selling bulletin here and have a concern. one side has the long bolt that attached to the bike secure and doesn't pivot or come out of the pegs while the other slides out of the peg/rearset assembly. is that one a defect or is this of no concern? lemme know if i'm making...

hey folks so my bike has stock 16/36 sprockets with the original 530 chains that are far too stretched. so here are some questions. 1. i think DrJ mentioned 18/34 sprocket configuration. how does that change the ride? 2. is it worth switching to 520 chains? if so, are there 520 with...