Search results

I have a master cylinder, caliper and coils from a 1976 CB550. Master cylinder has been rebuilt with a new kit, not crystalized, works great. Asking $50+ shipping Coils were bought as working spares, never used. Asking $40+ Shipping Caliper works fine and doesnt leak. Asking $20+ shipping...

Okay so my 1976 CB550 runs great when accelerating but after its warm the idle tends to hang at 2k and then eventually drop. I think the issue is because I moved the needles up one notch because I thought it was sluggish in low rpm acceleration. Im guessing moving the needles back down will fix...

So ive rebuilt the master cylinder on my cb550. The piston is still frozen in the caliper. But i've heard the best way to get it out would be to use the brakes. So im trying to reverse bleed my braking system using a syringe at the bleeder. I know I have brake fluid all the way up to the...

Hey guys, I am trying to get a 1976 CB550 back from the dead. What i have done so far, cleaned carbs, new everything in the carbs. New fuel lines, filters, spark plugs. When I first got the bike it ran on cylinder 1. Now it runs on 1&4, 2&3 are cold. I know that 2&3 are not getting spark. Im...

So picked this up off of ebay. It had grey overspray all over it that took me hours to remove.....and its definitely not a CB350 tank. What does this tank belong to? Will accept trades for similar condition CB350 tanks. Its shorter than both my cb350 and cb360 tanks, has a longer tongue than...

Hey guys, So last summer i picked up a CB360, got her running, cafe'd it a little. But she never ran correctly. Everything under 5000rpm was great, except for backfiring on deceleration. After 5000-6000 she would run rough, at 6000 she would stop accelerating. Oil is coming out of the left...

So Redbird was able to help me figure out my blinker issues.....now i only have two more before i can be legal! 1) Horn does not work. I don't think the leads are getting any power. I tried a new horn with no success. I tried taking apart the button and it seems to work fine, even filed the...

So I tried to look up as much information as possible before posting. And so far I have this: My CB360 has 3 wires going to the blinker relay, i picked up a two new relays from the auto parts store. One is an "electrical" relay, which i figured i would try after i could get the standard cheapo...

Hey Guys, Unfortunately i picked up a cb360 only to find out later that it has an exhaust stud broken off inside the cylinder head. I took the motor to a machine shop and the guy thought he would be able to get the stud out but was unsuccessful. He told me he thinks the only way to fix it...