Search results

Made for the Aprilia SC50. It is 13.5 inches long. Eye to clevis type shock. Perfect for those custom mono-shock projects! Both bolts are 10mm. Top eye is 24mm wide. Bottom clevis is 33mm wide. $50 plus shipping from MI.

Complete assembly. Shell, headlight and both bulbs. $100 plus shipping from 48085

I posted before in the selling forum about my shop but this one seemed more appropriate. Played around a bit today and made these swingarm bobbin brackets. Still need to make bobbins but those are easy. If there is demand, I'll make more. Great for normal steel swingarms that have no swingarm...

It's been awhile since I've posted here since I no longer have any 70's vintage bikes. All my three bikes are 90's vintage. Anyway, I've been busy starting a new design and machining shop in my garage. I have a CNC mill, manual lathe and a 3D printer. Let me know if you have something to...

1. LED tail, $15. Wired for typical Honda harness 2. LED turns, $10. Will need some bullet pins resoldered on. 3. 36mm Uni Pod, $10 4. Clutch lever, new. $25. Can be flipped for a brake but no switch mounting. It is the MSR AOF CL-170. "Adjust on-the-fly" style perch. Forged alloy...

I have a new clutch lever with an adjustable knob. Can be flipped for a brake but no switch mounting. It is the MSR AOF CL-170. "Adjust on-the-fly" style perch. Forged alloy construction for increased durability. Bearing in pivot provides smooth lever feel and wear protection. Universal...

Gold and white tank from what I think is a 71. Includes a good cap, new gasket and a petcock (not shown). Asking $85 plus shipping. Good condition inside. No leaks. I rinsed it myself with vinegar. Some shallow dents, original paint and some surface corrosion. Decent typical condition...

Anyone have a set of cb175 carb intakes they want to sell?

I have a pair of CNC intakes made for the CB175 and CB160 heads. 48mm center - center bolt spacing, 35mm OD and 29mm ID. $50 plus ship.

I've discovered a bracket that mounts easily to the swingarm bracket on my cb175 project. In the past, I've successfully used the OEM rearsets from a cbr900rr. Since I'm parting out my current 900rr, I have a set handy. As I disassembled the frame, I see the upper rear brackets have 3 holes...

I decided to part out or sell my bike whole. I just finished it and changed my mind for another bike. Here is the build sheet: Clear title. 7000+ miles. repainted many parts, including the frame and swingarm cb200t tank and seat. tank was cleaned inside with a vinegar bath. no rust. Seat...

Front brake plate, $10.

These didn't fit my friends cb200t. So they are up for sale. Black finish Emgo, part # 80-84033. Never used. Mounted one only to check fitment. Some wear from box only. $100 for the pair plus shipping from Michigan. 19" long and comes with 3 reducers. 1 3/4" inlet. Reducer kit...

I have a decent solid tank for a CB200t. I decided to get a nicer tank rather than paint this one. I removed the trim, cap and lock. You'll need new rivets to re-install them. Clean inside but areas of corrosion is evident. Will need a re-paint or use as is. Doesn't leak. No petcock...

I have a good condition tank from a 72 CL. It's pretty clean inside. Includes the cap but no petcock. As you see it with no dents to speak of and normal wear otherwise. Asking $85 shipped from MI. Eric

Parts left from recent bike purchase and teardown: 72 CB175 + shipping on all parts from MI. 1. gold tank. dent near front left. Clean inside. Includes cap. $75 2. both wheels & brakes. No axles or spacers. $75 3. cb exhaust. Typical rust out on inner ends. $50 4. front fender. Ok...

The motor developed an oil starvation problem and damaged the cam/bearing. So, I decided to just part it out and get a CB175. Here is what is for sale: cb100 triple clamp $15 brake pedal $10 kickstart pedal $10 I don't have pics of the lower end but I have the whole motor minus the camshaft...

Need one from the later 2 piece heads. XL or CB.

New never used. Nice adjustable knob and pivot bearing. $22 shipped from MI 48085.

I bought these new back in 2011 when they were first available. I mounted them and rode around the block a few times. Basically new and I added a few extra Honda rods/ends. Folding peg version. $100 plus shipping from MI 48085.