Search results

I've wanted to do this for a while, and now that I'm laid off its the perfect time. Learning some CAD software is good for me personally and for professional development too, so I decided to make the upgraded air filters for a stockish look. The goal is to provide more breathing for the engine...

looking for a halfway decent front fender for a cb550.

Just coming up with ideas for a future build. Does anyone know of any Japanese/Metric bikes that have external springs that will be able to accept emulators? I know the early CB350's and CB450s have the external springs, but according to the RaceTech website they don't accept emulators. Does...

Looking for a set of side covers, or even individuals. I don't need them to be in great shape as I'm pretty much just going to be using to take measurements and re-pop them in a 3D printer to make molds from.

Hey all. I'm looking into purchasing a manual tubing bender. I'll be using it for various bike and auto projects and also building roof racks. Does anyone have any recommendations? I don't need top of the line, but I still want a quality tool that will last and give reproducible results. Still...

soldI'm moving to Boston and I don't think I've got a place for this bike in my life anymore. Bike is located near State College, PA. Asking a bargain price of $3000 firm. I want this gone before I have to move next month. It is a 2015 KTM Duke 390, bought it at the beginning of last riding...

Airbox for a 1984 CB125S, I believe it will also fit the '85 model. $60 shipped, obo. MVIMG_20180105_201640 by J L, on Flickr MVIMG_20180105_201633 by J L, on Flickr IMG_20180105_201627 by J L, on Flickr

Never used swingarm extenders from Cognito Moto. Designed for a CB350. $45.00 shipped obo. https://cognitomoto.com/products/cb350-weld-on-swing-arm-extenders IMG_20180105_201655 by J L, on Flickr

Abel Brown Hero gloves in brown for sale - size XL. They're in great shape, I only wore them 2-3 times. My palms are XL fingers are more like L so these just don't fit me right. $50 shipped obo. https://abelbrown.com/collections/gloves/products/hero-leather-glove?variant=462065665...

The top motor mount (#8 in the link) for the CB350's is no longer available. I'd like to get the motor mount powdercoated and need to drill out the bushing before i get it coated. Can I make a similar bushing out of delrin or some other similar material? For reference, this is just a standard...

So this is actually a question for my impreza, but I want to wire in a new set of fog lights. I want them to operate in three modes. 1) Not on at all 2) In concert with the existing fog lights 3) independent Is a double pole single throw what I'm looking for? I have a three position switch I...

Howdy all, I'm putting the CL scrambler pipes on my CB350 with a set of quieter core mufflers from Cone Engineering. Anyhow, I need to add a kink to the exhaust so they 1) clear each other and 2) clear the rear shock. They're barely touching so not much is really needed, but my question...

I really want to clean out my storage unit and I'm tired of moving these parts from apartment to apartment. Show up in Central PA with a case of decent beer and the parts can be yours! CB350 parts good for a disc brake swap. Not willing to ship yet. Located in State College, PA. Could bring...

I've got an air filter box for a CB125S, should fit 84 and 85. $35 plus shipping.

replaced my fork springs, if anyone needs the used ones and just wants to cover the ride they can have them.

Has anyone used a Teflon or similar polymer washer in place of the copper crush washers for the drain on front forks? I'd like to not screw up the powder coat and wonder if Teflon would make a good seal still for the 6mm drain bolt.

I'm extending the swingarm on my CB350 to increase shock travel and compensate for the CB450 stem which will decrease the wheelbase. Anyhow, the longer chain may slap and I'd like to protect my soon-to-be powdercoated swingarm. I want to mill out a little protector and mount to the existing...

looking for a seat for CB350. Years '72-'73. Doesn't have to be perfect, but I'll need it to make it through at least the summer riding season.

Hi. I'm putting a CB550 front end on my CB350. The CB550 forks are about an inch longer than the CB350. Am I able to get new fork tubes that are shortened by an inch and still have all the clearance/motion I need? One of my tubes is shot and I'll be getting replacements anyhow (and new...

looking for a CB/CL450 top triple, might be interested in top and bottom if the price is right. I'm looking for the style with the rubber bushings for the bars, not the rigid mount.