Search results

I would just spend the money on a M-Unit motogadget. It saved me days or weeks worth of wiring and probably lots of extra wire as well.

I had great fun building the bike and riding it for about 500 miles. But with most things in life I'm moving onto newer and better things. I had some photos taken of the bike out at my local airport about a month before I sold it. Honda CB350 by Matthias Salzburg, on Flickr Honda CB350 by...

Amazing build. It's a shame your selling it.

Re: Salzburg '73 CB350 - Summer Riding I've put some more miles on the bike. This past spring when I was starting it up for the first time this year I had a pretty big problem. The bike ran for 5 minutes and then suddenly quit. I finally diagnosed it as a faulty regulator rectifier. One of...

Re: Salzburg '73 CB350 - Riding update - Might sell FYI this is the parts list: Handle Bars 35mm Tarozzi clip ons - Hand polished Kawasaki EX500 Ninja Adjustable Clutch Perch & Handle Suzuki DL650 Left switches Motion Pro CR Competition Throttle Motion Pro Throttle cable CRG Arrow mirrors...

Re: Salzburg '73 CB350 - Riding update - Might sell I'm starting to ride the bike more this spring and really enjoy it. I've got all the bugs worked out and the carbs sorted. I may ride it for a few more months and then move on to something new. Anyone venture a guess as to what this may be...

Re: Salzburg '73 CB350 - Update: 100% complete - fine tuning the carbs Yeah, but I think 9.5:1 air fuel at idle and on the highway at 1/8 throttle is *just* a bit too rich. Also 10.5:1 WOT is also a bit too rich. I have no clue what that guy was doing when he tuned it. I had a supposed...

Re: Salzburg '73 CB350 - Update: Tuning the VM30s Trying to fine tune my VM30s. I had a local shop give it a go and they screwed it all up. Said it was perfect and later find out that I'm getting something like 20mpg and black plugs. I've got my trusty wide band on it now and will do it...

Re: Salzburg '73 CB350 - Update: one last item - mounting front fender Well it's only taken a month for me to get my ass in gear to finish the fender mount. I've been riding the bike a bit and it seems just fine. I ditched the stock steel fender bracket and made my own out of some 6061-T6...

Re: Salzburg '73 CB350 - Update: back home - needs front fender work Aluminum fender bracket by Matthias Salzburg, on Flickr Got started on mounting my front fender. I'm ditching the stock fender bracket (replaced with Tarozzi fork brace) and am fabricating some aluminum brackets. I'll also...

Re: Salzburg '73 CB350 - Update: back home - needs front fender work Could it be timing or fuel? The shop owner said he re-timed it, which seemed odd since I set the timing according to the Honda shop manual with my timing light. I'll check compression as well with my tester.

Re: Salzburg '73 CB350 - Update: back home - needs front fender work I picked it up from the shop today. I rode it home and she died on me 12 miles from the shop. Apparently my gas cap isn't venting properly. I had to crack it open for it to continue to run. Also I need to raise the idle...

Re: Salzburg '73 CB350 - Update: 99.9% finished / dyno / state inspection passed! Just got a call from the dyno shop. It's running a bit rich in spots and lean in others. I jetted it with recommendations from other builders. He's going to try some things to get it running smoother...

Re: Salzburg '73 CB350 - Update: 99.9% finished / dyno / state inspection passed! Bike at dyno shop by Matthias Salzburg, on Flickr Bike is now at the dyno shop. Seems odd looking at an empty garage with nothing to do.

Re: Salzburg '73 CB350 - Update: 99.9% finished / tank fixed / state inspection next The bike passed safety inspection today. :D I'll get it on the dyno tomorrow.

Re: Salzburg '73 CB350 - Update: 99.9% finished / tank fixed / state inspection next Nope, 70 on a 70. Brakes are CNC 4 pot (Baja racing stuff) wide 5 bolt pattern. All other aftermarket brakes are shit. These can lock up the wheels on dry pavement and have great pedal feel. 2442cc, TF-1...

Re: Salzburg '73 CB350 - Update: Motor runs! -- Pin hole fuel leak :( 99.99% finished by Matthias Salzburg, on Flickr Loaded up the bike on my truck hauler. I'll take it to my local shop for state safety inspection and then go have the carbs dyno tuned. The seat pad and front fender are yet...

Re: Salzburg '73 CB350 - Update: Motor runs! -- Pin hole fuel leak :( Sealing the tank this afternoon.... I hope it fixes the leak. I'm getting anxious to ride it.

Re: Salzburg '73 CB350 - Update: Motor runs! -- Pin hole fuel leak :( Video of the first start. http://www.flickr.com/photos/87945008@N02/9226036098/

Re: Salzburg '73 CB350 - Update: Motor runs! -- Pin hole fuel leak Bike runs, but tiny pin hole fuel leak on bottom of the tank. by Matthias Salzburg, on Flickr Bike runs, but tiny pin hole fuel leak on bottom of the tank. by Matthias Salzburg, on Flickr Bike runs, but tiny pin hole fuel...