Search results

  1. Rgrpfdr1

    1972 CL 350 Cafe Project

    Reconfigured the clip-ons the other day per Crazy PJs direction, after he adjusted my front brake and we added fork oil to the forks. Once he’s finished with the carbs I’ll swap them out and be rrady for some longer rides.
  2. Rgrpfdr1

    1972 CL 350 Cafe Project

    Proof she actually is running
  3. Rgrpfdr1

    1972 CL 350 Cafe Project

    Not sure who made them, but I bought them from Dime City Cycles.
  4. Rgrpfdr1

    1972 CL 350 Cafe Project

    Wiring wasn't too bad. Just now turned everything on and it works! I need to adjust the angle of the grips/controls, then adjust the front brake cable. May do that tomorrow if I have time.
  5. Rgrpfdr1

    1972 CL 350 Cafe Project

    Changed the drag bars out for Tommaselli clip-ons. Should fix the break cable binding that I had previously.
  6. Rgrpfdr1

    CB 350 CappilliniMoto Oil Filter/Cooler Kit

    Damn. Looks like I need another item to my want list.
  7. Rgrpfdr1

    1972 CL 350 Cafe Project

    Valuable information! Thanks! I’ll be working on these this weekend. Work has me by the balls this week so I’m barely able to do more than look at the bike in passing right now.
  8. Rgrpfdr1

    1972 CL 350 Cafe Project

    PJ & I built these using brass washers that we modified to fit the holes.
  9. Rgrpfdr1

    1972 CL 350 Cafe Project

    Brake vent screens installed!
  10. Rgrpfdr1

    1972 CL 350 Cafe Project

  11. Rgrpfdr1

    1972 CL 350 Cafe Project

    No, I didn’t rebuild and clean these carbs. I had someone do it for me and I think you’re correct. The good news is that PJ is rebuilding and modifying my spare/parts carbs.
  12. Rgrpfdr1

    1972 CL 350 Cafe Project

    PJ, my only fear is drilling the pipes. But we’re gonna doit anywayz!
  13. Rgrpfdr1

    1972 CL 350 Cafe Project

    @Knoxes thank you. Here are some pics, taken from the rear wheel, then left side & right side. Hope they help answer your question.
  14. Rgrpfdr1

    1972 CL 350 Cafe Project

    PJ http://www.safrtool.com/ https://youtu.be/rXmZIxfchaE
  15. Rgrpfdr1

    1972 CL 350 Cafe Project

    I found the other float online. I believe these are early mode carbs. I also found a site that sells jets for modified bikes. https://www.6sigmajetkit.com/honda-cl350-t-twin-jet-kit.html I took the pods off and she ran a little better without an air filter. I’ll have to play with everything...
  16. Rgrpfdr1

    1972 CL 350 Cafe Project

    Right side plug fowling >:(
  17. Rgrpfdr1

    1972 CL 350 Cafe Project

    Thanks!!!
  18. Rgrpfdr1

    1972 CL 350 Cafe Project

    She needs help. Pistons are 65.5 Bore-tech and I have pods on the carbs. YouTube video: https://youtu.be/txkOWmQ8cmE
  19. Rgrpfdr1

    1972 CL 350 Cafe Project

    Bike is now running but the idle is low (sub 1k). Pistons are Bore-tech 65.5mm and this is essentially a new bike. I’ll post a video tomorrow morning if anyone is interested. Not sure if I’ll need new jets or something else.
  20. Rgrpfdr1

    1972 CL 350 Cafe Project

    Her butt
Back
Top Bottom