Search results

Recently moved out of state and had to leave the bike at my parents home. They want it gone so I'm looking to part it out. Have put a lot of time, love and a bit of money into it. It's a '74 360. Below is a pic of the final build, which I think turned out well. I just don't have the space or...

Looking for both round and a flat rubber mount that will fit a 74 CB 360. Doesn't need to be new, just want something that works. Thanks.

Just started wiring this up. Looks like I may be in over my head. I have the tail light wired as below (2 LED strips acting as brake, running and turn signals) with a 12v flasher relay. When I hook the battery up & turn the key, the rear lights come on. The left hand controls, however, don't...

Looking for clutch and throttle controls w/ wires and integrated levers. Something that will work with a 74 360. Bought some cheap controls and already the components are beginning to snap off.

Installing my rear sets, got excited and cut the brake arm up before double checking the spring. It's close to fitting, but not quite. The only solution I can think of is to heat the spring and try to bend it to fit. Not sure if that will compromise the strength of the spring though. Any other...

Looking for both clutch and brake (drum) control assemblies (w/ wiring attached). Let me know if you have anything.

Might not find much interest here, but I have some extras. Send a message my way if you need anything. Front turn signals + assembly Rear turn signals + assembly Mirrors Rear shocks Brake light + assmebly Battery box Tank emblems

New to wiring and looking to install an led strip to act as a running/brake/signal light on a '74 360. Curious if I need to pick up both a load resistor and flasher relay in order to make this work properly (or if neither are necessary).

In need of some (4) exhaust retainers for a 74 360. Also looking for the following: Switches brake/clutch levers Headlight bucket/lens Speedo/Tach Doesn't matter if the latter are original parts (as long as they fit and are, preferably, black). Let me know if you have anything.

Started this project a few months ago. Likely going to exchange the boots. Nothing impressive thus far; just wanted to document this to keep some motivation.

Looking for a good condition Yamaha TX650 Seat pan. Please call or respond and we can work out the details. Milton Cycle: 712-204-3147

Looking for a set of CL/Scrambler style headpipes for a '74 CB360. Don't care about rust/dents if the price is right. Thanks.