Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
with the bike on the center stand, if you can feel any side to side wiggle in the rear wheel it`s time to change them. it made a HUGE improvement on my bike. to clarify how quickly they wear, my bike had 14,000 miles on it when I did them and they were SHOT.
This
is one of these... http://store.summitracing.com/partdetail.asp?autofilter=1&part=BOR-20104&N=700+4294923429+400310+4294922677+4294906107+4294783510+4294906105+4294783393+4294904092+115&autoview=sku
if you go that route keep in mind it is only a tip so there is NO baffle. You`ll have...
Heres another lil tidbit, if the offending screw is still being stubborn try putting a dab of valve grinding compound on the tip of the impact driver bit. It works, trust me.
A 130 will fit a stock swing arm no problem. It gets a bit close to the brake stay arm but since you have an F (rear disc) I guess thats a non-issue :D. As far as handling goes, my bike rides/handles fine BUT I would`nt consider it a Cafe, nor do I ride it hard (I am an old brittle fella). That...
I already have taken a pay cut , any more "cutting" and it`s a nice fresh Mayag box for me ::) And I don`t work for a manf, I`m @ the dealer level. No work=no pay for me, Big 3 go under = no work...getting the pic?
Perhaps you would be happier unemployed living in a refrigerator box? I work in the auto industry and I kinda like to have food n stuff for my kids. Sorry to spoil your party dude.
Heres my solution so far, its a cheep trailer lamp mounted to a "fabbed" peice of alu angle stock this light is brake/tail. The sidemount plate has an LED that is only lit for tail, the plate lights are those plate bolts that have an LED in them. Not everyones cup o tea but it works for me. More...
If ya make it down to Long Island, stay clear of the Long Island Expressway...it`s anything BUT express, esp at rush hours (that covers from 6am till 5:45 am the next day if ya get the pernt). DO take 25a out to the Orient Ferry...awesome riding, vinyards etc, very nice.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.