Search results

I've got a pair of kevlar riding jeans that don't fit me anymore up for sale. They're 31" waist, hemmed to about 32" inseam. They're a slim fit, not super skinny. Worn infrequently, so they're in great shape. If you're not familiar with the brand, check out the original product page...

Hi all - as the title suggests, my CB350 is only firing on its left cylinder. Pertinent details: [list type=decimal] It is a rebuilt engine and was started for the first time I am running a Pamco electronic ignition I used a timing light, and the left cylinder (the working one) is a little...

Got some used OEM parts off of my CB350 that i'm looking to sell: Gas tank - has some dents and has been painted by previous owner. A little bit of surface rust inside. Gas cap is still in good shape. $50 + shipping: Seat, SOLD Headlight assembly, SOLD Tool box, $20 + shipping, i...

Hi guys, exciting day for me today. I finally got the bike buttoned up enough to try to start it up. It's a kick start only and after a few kicks, it starts running! I go to shift into first, and it dies. Not a big deal i think, the clutch lever had some slack in it so maybe the clutch...

I have a CB350 that i've been working on, very very slowly. It was fall of 2013 that I reassembled the engine, and i (stupidly) didn't test the shift forks or transmission to make sure they were installed correctly. My memory is hazy, but I'm pretty sure i put the transmission in neutral -...

Bought the wrong chain for my bike, and I've sat on it too long to return it. It is a gold 120 link 530 pitch X-ring chain made by JT sprockets. Comes with master link (small plastic bag in second picture) and associated X-rings and grease. Never used, new in box. Retails for $80 +...

I took apart the forks on my CB350 because the screw at the bottom of the fork case was leaking. Part number 19 shown here in the K4 diagram However, after i got everything apart, what I had was a lot closer to the K2/K3 model: Take a look at the picture below to see my fork with all...

I'm in the middle of a CB350 tear down and wanted to offload some parts that I wasn't planning on using. First up are a full set of pegs for the bike, $5 shipped: Airbox, $20 shipped: Left side mirror, $5 shipped: Full set of turn signals, $10 shipped: Not sure what this is, brake...

I've started on my CB350 cafe build and managed to take most of the top end of the engine apart. I started measuring the items according to the shop manual and started to wonder what I got myself into. Here are images of the wear on the cylinder side covers where the camshaft rests. Is this a...

Hey all, I wanted to introduce myself and my new project bike! I've been seeing all sorts of sweet cafe racer projects all over the internets and thought it was high time I try to build one of my own. And as a lifelong fanatic of cars of bikes who's never torn down an engine, i thought I owed...

I have been fighting the gear shift pedal for the last day and a half. I took off the tension screw but it'll only budge a few mm. I cut off a small section of it to try to see where it was binding up. See pictures below: In the second image, there is a hole in the shift pedal that looks...

Hello all! I recently picked up a 1969 CB350, at least that's what the title says. But the frame VIN and the engine serial number seem to tell a different, more confusing story. The frame VIN is CB350-200xxxx and the engine number is CL350E-406xxxx. From this website...