Search results

Ever figure it out? That looks like the stock shock pin location to me, based on a quick GIS of a 78 cb750. For mine having the swing arm on with the shocks bolted up I made up a simple jig piece to hold the shock with pin at the stock angle. I measured and made a rod to keep the pins the...

Sooo reworking the subframe and I need to get the spring off the stock shock. This wasn't too sketchy actually. Slide the bumpstop down to expose the nut, and it comes apart. Now I can set the swingarm at full compression and make sure my new tubes don't interfere. I don't think I'll keep...

Shinko 4.10x18 for the front and rear.

Some cleaning before paint.

Hi all, I picked up a CM400t $300 in decent shape, running, 9600 on the clock and it had a title. Good to go. Gone back and forth deciding what direction to go with it but I think now I'm going to get some Shinko 705s and create a scrambler type. Plan: Complete(Except for the engine which...

Looks great! I am going to be attempting the same thing... How are you mounting it to the fork? Old mounting arms bolted or riveted to the fender?