Search results

Update since it has been a while. A bit of progress follows. -seat hoop welded -shock mounts to raise the rear -new headlight -heat wrap -shortened exhaust -stripped primd and a few coats of paint on tank. -fiberglass seat almost finished. pics. stripped tank finished heat...

Bike is a 1980 cb750c that I am cafeing. I would like a circular headlight around 7 inch diameter. Thank, Should have been more specific.

Need a headlight and bucket for a honda cb750.

Gas tank is leaking out of the previously ghetto sealed areas. I need to fill it with a bernzo kit like plumbing but unsure where to go from here. removed the petcock and might be able to plumbing kit seal it up. It might not look pretty but it wont cost more then 50$. Stripping covers to get...

Some progress on the bike. Yogi, quick question in one of the pictures I bought a breather pod but what did you do to complete the other side of it? Clipons on, new breather pod. Some paint and grinding. New parts from ebay and other random stuff is on the way. Bike is going to a welder shortly.

pic?

Thanks, Bought a pair

35mm clip ons. Thanks

Thanks to mike and the new lift. Progress was made. Forks surprisingly look very nice. No pits or anything. It always feels great to unbolt just garbage weight that is unnecessary. digging the vintage looking keychain Tool kit that came with the bike, They have probably been in there for 31...

bump

so here is a very rough intent sketch. Sorry for quality was about 3 min of work. So really need help for those shock ideas or I will have to get tab welded on and use that as an extension for the shocks. I feel with a longer rear shock set up and a fat squishy seat the bike should have...

Re: 1980 cb 750c Need input So a little update. I need help sourcing the largest length eye to clevis shocks on the cheap. I have stock 13 inch inside to inside length or currently 330mm on the bike. I would like larger shocks so I may run an undertail exhaust. Some pictures. I mostly have...

1980 right side cover for cb750c Thanks

Re: 1980 cb 750c Need input Any feedback from them? Have some new progress on the bike will upload tonight.

Re: 1980 cb 750c Need input Thoughts on this seat? http://www.ebay.com/itm/1980-1982-Honda-CB750C-CB750-C-cafe-seat-cover-foam-/400258028644?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D6083565954376376130#ht_1225wt_952

Re: 1980 cb 750c Need input Got the ears and headlight in along with some wrinkle paint for some of the side covers. Exhaust wrap and coating too. Also new battery and about to order some bars. 1 clubmans 2 flat bars Not sure any ideas. Also where is a cheap place to score either clubmans or...

Re: 1980 cb 750c Need input Maybe use a seat like this http://www.cb750cafe.com/parts.php?id=10 and have to modify a little bit due to the C frame.

Re: 1980 cb 750c Need input So here she is without the seat and ugly fender. I was looking at a set of side covers that were on ebay that ended up going for 130 with shipping. I didnt feel like dumping that much into a set of sidecovers so its looking like I am going to relocate a lot of the...

Re: 1980 cb 750c Need input Just ordered a headlight and put a bid on some ears. Next in line is to try and get the seat situation taken care of. Also removed the nasty rear hugger and taillight assembly. Will look into getting a flexible led strip with a cafe type tail. If I can find a seatpan...

revival, What carpy seat was that and did you have to modify the subframe of the 750c to fit it? Thanks