Search results

I know this is a long shot but I’m selling a set of RC Component spun aluminum wheels (similar to Performance Machine Chicanes). Front measures 17x3.5” and rear is 17x6-1/8” wide. These are set up for Kawasaki brake rotors (rotors not included) and 20mm axles. Front looks to be chromed or highly...

Like I stated in my Kz650 build thread on her, I need to delete eBay and Craig’s List off my phone. Saw this Amen Savior frame for a Z1/Kz900 engine on eBay a week or so ago. After much internal debate and back and forth communication with the seller, I made an offer. The bike was 500 miles...

Found this air filter in my FS pile. I’m tired of looking at it. Pay shipping and it’s yours. If no one claims it by 5/6 it goes out in the trash next day. Later, Doug

Selling off leftovers from my 650 project. Everything is in fair-good condition. Most parts can be cleaned up and will present pretty well. No concours parts, but decent enough for a daily rider. Parts include -Entire front end minus top triple, headlight, and gauges. -Entire rear end with...

Hey, I have some Gpz550/750/1100 stock body panels that I don’t need. I have three tail sections (with side rails), 2-3 side panels for each side and two seats. *I don’t really know why I kept buying spares.* None of the body panels have original paint, so expect to refinish them. One seat is...

Selling a used PM classic 2-piston caliper w/pads. I bought this for a project but the pads didn’t completely cover the rotor’s sweep area. Condition is 8/10. Retails for $220+. $175/shipped or best offer. Later, Doug

Hey All, I’m not sure if this should go in the Race Ready or Streetfighter category so I’m placing it here. As if I didn’t have enough old Kawasaki projects already, I just picked up a ‘79 Kz650B for not much $$. It was one of those “I can part it out for a profit if nothing else” deals...

I just picked up a old tank in so-so condition and want to graft a newer style sportbike cap onto it. If anyone has a beat up tank, let me know. I really only need the filler/cap area and 1-2” around it. I’d prefer that the tank top be relatively flat as that will make my life easier. No cap...

I know it’s a long shot but someone here either has a Vfr or did a SSSA swap on something… I’m selling a freshly rebuilt remote-reservoir adjustable Works Performance shock for a ‘90-93 Honda Vfr750 Interceptor. I had it rebuilt by Worx Shocks in California. It has adjustable rebound and...

Putting feelers out for gauges that I bought for my Gpz750 project. I think I’m changing dash directions so I want to sell these so I can buy my new setup. The Stack 80mm tach and Koso are brand new in original boxes. I only opened them up to look at them. The Stack boost gauge is a new, open...

I just bought a set of RC Component spun aluminum rims from eBay yesterday. The front has a slight bend in the lip per one of the pictures. Before hitting the BIN button I was researching repair costs and it seem like $150-200 is the normal range. Does anyone have recommendations for a...

I didn’t find much during a search on here but has anyone arranged pickup of an engine (or other freight) from an eBay seller across the country. I found an engine and I’m pondering buying it. The seller stated they would crate it but would not arrange pickup and shipping which seems fair as I’m...

Hey all, I’m working on a ‘85 700 Nighthawk that someone removed the ignition switch and twisted all the leads together with a residential wiring nut. :facepalm: Anyways, I have an ignition switch coming but it has 5 wires and the wiring diagram I found shows 5 wires. The problem is that I...

Long story short….I need a place that can provide a longer remote reservoir hose, refill the oil, and recharge a Works mono-shock for me (at a reasonable price). Please don’t recommend Worx Shocks. Their customer service is horrendous. Thanks. Later, Doug

I’m working on a 80/81 Yamaha XS400. I’m trying install a Koso TnT combo gauge. I tested the main power hook-ups and I’m getting a “hot” ground with the key on. If I disconnect the 3-wire voltage regulator, the circuit switches back to a ground circuit. Right now the harness ground is not bolted...

I have some Z1/Kz900/1000/1100 parts I’m selling. I was saving them for a trackday weapon build but I already have too many projects. All prices are shipped to your door in the lower 48 states from zip 63303. Mikuni 29mm Smoothbores. Good shape overall but could use a minor cleaning. Slides...

I just purchased some nice, used Keihin Cr31’s from eBay for a Kz900 based trackday bike I’ve been gathering parts for. My question is: anyone have first hand experience using the CR’s on a Kz? I have a set of MTC 1075 12.5:1 pistons and a pair of Gpz1100B camshafts. I’m still looking for a...

Selling a D&D shortened muffler. Inlet is 50-51mm. No dents, dings, or major gouging. Just some light scratches from slipping the band around. Missing a couple rivets from the inlet in where someone shortened it (not me). I forgot to get an overall length but can measure for anyone interested. I...

I’m working on a ‘82 Goldwing for a guy. Carbs are in bad shape due to neglect. Everyone says go with Randakk’s carb kits but all the Gl1100 kits seem to be “Out of Stock”. I found similar kits on 4into1. Any idea if they are the same or, if not, the same quality? I know I need fuel bowl...

I’m looking for a good set of aftermarket drop-in cams for a 1075 10.25:1 engine with stock head. Maybe something like a Cam Motion #Z1 or #Z2, Web #118 or #119, etc? May consider an OEM Gpz1100 cam set. Let me know...have $$ waiting. Later, Doug