Search results

VBroom, It’s a simple set up, using the mounting holes were the handle bar risers were. The top of the triple trees had the original Speedo/Tach mounting tabs removed. Then using a 7/16 x 2” bolt, through the holes and bushings for the risers, I attached two simple straight strips of steel to...

I'm running a Bennelli tank I got from e-bay. I still have the CB200 Tank shell which I plan to make into piece of gear head "Art" for my garage wall.

That was a temporary set up. When i first did the mechanical resto, I needed a way to be able to ride, so I used a 25oz Aluminum drinking water bottle, just made a hole and put a brass fitting on the bottom with a couple of orings, this took a couple of tries until i got a leak proof setup...

Here is my CB200T build http://www.dotheton.com/forum/index.php?topic=24016.0

Im afraid i hadn't updated this in a while, but the truth is that to me, it is more fun to work in the garage than to work behind a computer.... with thant being said... here is my update... ALMOST DONE!!! I only have a couple of tasks left to be 100% like, the rear sets a bit, Paint the Rear...

Join the "I also have a Mojave 360 form Ebay club" Here is a Pic of the one I installed on my CB200T,

It has a mazda 12A Rotary engine.

Update: I have been making progress, just haven’t been updating this post. In the Last Couple of weeks, I have been busy working on the Front end and Rear end of the Bike. New steering stem bearings, rebuilt the forks, Re-painted the Front Brake, installed a fork brace instead of the...

Update: I made progress on the Frame, and the Tank…. On the tank I finished the rear bracket, I used the stock bracket that holds the Tank rubber mount and fabed up a cross member to the tank. On the Frame…. I took off all the tabs that did not plan to reuse, also took off the rear...

Wow, the search function works!!! I have a stuck lower race on my steering stem. I think i will try the 4" grinder. If I try welding a bead on the race, my firecracker box would create too much splatter on the stem.

Update: Yesterday, I fabbed up the front tank mounts, I used the Old CB200T tank brackets and some 1.5”x1.5” Square tubing I had on hand. I liked how it tuned out, except my little non gas welder makes some ugly looking welds.I plan to clean these up a bit and finish the rear bracket next...

Blue: Lessons? what lessons, more like self taught so far... but i got the hang of it real quick,. Especially once i asked how to get her in neutral... ha ha, I had no idea, I knew 1st was down, then the rest were up, but that was it. don't get too scared, I am signing up for some rider lessons...

1975 CB200T Café Project After finishing my last project (1973 Opel GT), I had been considering a motorcycle project for the last year or so. Finally last November, I decided to build a Café racer. I started my bike project by buying one of the Bennelli Tanks on e-bay. And I started to look...

Im also working on mounting one of these benelli tanks to my CB200T, I can also confirm that the petcocks are 10mm X1.0 thread. I ordered mine from a scooter parts webstore www.treatland.tv

Greetings form Laredo, Texas (on the Border with Mexico) Finally pulled the trigger on a 1975 Honda CB200T. Ive been looking for a bike with a little more cc's but really like what some of your members have been doing with these small bikes. I'm not going to lie to you I never ridden a...