Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
So I have a CB350F and the person I bought it from used it as a daily driver in great shape. But one weird thing I noticed is every pipe I ordered was too small the diameter of the end of the header is over 2 inches wide. Someone said it was a header for a cb750. The muffler was custom made and...
*UPDATE*
Ok so looking over the diagram I notice after tracing all the wires that there is no wire running from the Starter Selonoid to the starter. Unless its in a harness somewhere I cannot see, but every wire coming out of it is clearly visible. Also there are 2 terminals on top which one...
Ok so somewhat good news. I completely rewired everything grounded everything (I think) I needed to ground to the bike and installed a different ignition kill switch which is getting 12v and hooked it to the red wire from the coils. This time instead of getting nothing I get a spark from the...
ALSO...This is one that I cannot find in the Diagram. Call me a noob. But I cant seem to figure out if it goes anywhere.
And last but not least. Is there anywhere SPECIFIC I need to ground this on the bike>?
Its coming off the main harness by the celanoid.
On dyna 5ohm coils does it matter if the points are on the top or bottom? Also I guess I should ask if the 12v ignition wire connecting to the 2 coils should be on top or bottom of the coils. Also so far Ive seen 2 things that need to be grounded. One coming from the rectifier I believe, one...
After many hours of trying to figure out why the hell my wires are different from the diagram...I realize the horn and engine start button look like twins ;D . So I installed new Dyna coils, dyna s ignition, graphite wires, and new plugs. Keep in mind the bike worked fine before. So wires are...
So I got the universal rearsets and linkage kit from dimecity. They fir perfect and the linkage kits are the perfect size. Only problem...(forgive my ignorance.) Where to the linkage kits connect to? When I look at other pics there is a small piece that connects to the actual shift bar that will...
Would it be bad to uughh....Cut part of the small end off of the muffler so its a bigger end that goes into the headers? I really like this muffler :-/
AHH! Pulling my hair out.. Fuck it.. I cant find a muffler that'll fit this stupid thing. I think Im just going to buy the full 4-1 set. I just liked the idea of black headers and a massive cannon of a muffler. Guess I can only get whats available.
I am currently working on my first project which is a CB350F and it is going quite well. The headers on the bike I believe are not stock from the previous owner they are 4-1. He also installed a garbage custom exhaust. I stripped the pipe but the headers were still good. So I wanted to order a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.