Search results

I am selling a set of professionally rechromed CB/CL350 points and tach covers. These were just rechromed the other day, but I decided to go with my finned covers. They are in perfect condition.

I'm selling a set of Mikuni VM32 carbs. They have been used on my bike for about 30 miles. They are in great condition. The only thing is that the choke lever on one of the carbs got bent and has a crack in it. It is still functional, but can be replaced for about $10. The jetting is 190 main...

I'm selling a set of finned points and tach covers for the CB350 and CL350 series of bikes. $95 shipped CON US

Just wondering if anyone out there has the Sudco Mikuni Tuning Manual in PDF form. I don't mean the Mikuni Super Tuning Manual provided here: http://www.mikunioz.com/download/pdf_files/vmmanual.pdf. I mean the one that you can buy from Sudco or DCC in book format.

Looking to trade two Mikuni VM32s for two Mikuni VM30s. My VM32s have about 30 miles on them, so virtually brand new. The jetting is 190 main and 35 pilot. The only thing is one of the choke levers got bent accidentally and is cracked and may break if it's bent again. Probably needs to be...

I'm selling a nice set of CL350 Scrambler high pipes. The headers are in good condition. The mufflers are not so good. They were rusting through so I had to do a patch job on both to keep the noise down. Good buy if you plan on scrapping the mufflers and keeping the headers. $95 plus shipping...

Selling a pair of Tarozzi Universal Rearsets that I bought from Fast from the Past. Comes with a 270mm connecting rod that fits perfectly for the shift shaft on a CB350 that I also bought from Fast from the Past. Originally paid $180 for the rearsets and the rod. Asking $100 OBO.

I have a bunch of stuff I'm selling that came off a running 1971 CL350. Here is list of the things I have and prices (all prices don't include shipping): ANYTHING THAT DOES NOT SELL WILL GO ON EBAY (and will most likely sell for more than listed here) Carbs (one diaphram is perfect, the...

Greetings all! I had my engine glass bead blasted and it looks great with the bare aluminum. I have it all assembled now and I was wondering if polishing the engine is worth the hassle? Right now keeping the engine clean is pretty easy. But if it's polished, will I have to keep polishing it...

Hey Everyone! I recently picked up a 1971 CL350 and have been slowly turning it into a cafe racer. I'm getting close to finishing everything up. The last two things I have to do are get a new exhaust system and paint the tank and seat. I started a blog a few months ago and I have been posting...