I found this rusted hulk a few years ago and over three years transformed it. Lots and lots of mods: VM carbs, extended manifolds, PMA cog by nversion, single points conversion, spin on filter, oil cooler, plus custom seat, tail light, headlight bracxkets, harnesses, risers, exhaust pipes, mufflers, engine mounts, battery box, side panels, too many mods to remember.
The bike started life as 74 TX650: 70 psi compression, damaged crankcase, shifter drum bearing ground away,, badly pitted valves, undersize pistons, oversized bore, gunked up carbs, badly oxidised and rusted. Over three years I tuned it into what you see in the last two pics.
The bike started life as 74 TX650: 70 psi compression, damaged crankcase, shifter drum bearing ground away,, badly pitted valves, undersize pistons, oversized bore, gunked up carbs, badly oxidised and rusted. Over three years I tuned it into what you see in the last two pics.
