WTB Honda FRONT turn signals, dual filament sockets.

trek97

No Custom Title
DTT BOTM WINNER
Front, Dual filament factory Honda style front signals.
Specifics, I only need the decent condition sockets w 2 wires.
Any condition bodies, (pitted, rusty, bent cracked is fine.)
If you got just one or a bucket full...please let me know. Thanks

03E9B41D-A506-4E6A-882F-685B2DA121BB.jpeg
 
Last edited:
Is there something special about the old Honda sockets?
Because you can buy BA15d sockets brand new from a variety of sources.
 
Is there something special about the old Honda sockets?
Because you can buy BA15d sockets brand new from a variety of sources.
In decent condition...The factory sockets are just so much better quality than the new sockets provided w Repop indicators.
 
Here you go, Eric. One of the two is about perfect, looks almost like it’s right out of a Honda parts bag. The other is good, especially the socket, rubber boot, and wires. The metal retainer has some corrosion. I discovered that one of the lens screws was missing so a small bit of moisture seems to have gotten in. No damage to the socket, though.
80422261-4047-462E-B241-AC8330615106.jpeg
E1B2595D-E226-4430-B9F1-A57149A7A378.jpeg
 
Haha Thanks so much my man. PLEASE, Let me know the cost of it all, once you get the shipping.
 
Back
Top Bottom