stubsryan
Been Around the Block
Happy with the result. Might paint the bracket but I’ll decide once the whole bike is together
Sent from my iPhone using DO THE TON
Slides are closed at idle, needle height won't have any effect.
Sounds like fast idle needs adjusted.
Bike runs but idles way too high when warm.
Needles are tied directly to the slide.
Not sure what you mean by the fast idle?
The idle screw adjustments? They don’t change the rpm much if anything noticeable at 4000 rpm. I’ve tried all the way in and all the way out with no real change
Yea, these carbs do have a mechanical fast idle, actuated by the choke lever.That may be a fast idle if your bike has such a thing