regulator wiring help!!

hi guys have this
https://www.amazon.com/ECCPP-Regula...4MZQ1VSFJ8M&psc=1&refRID=R8DYY724X4MZQ1VSFJ8M

Im starting my wiring from scratch and I can't figure out how to wire this in.

any help appreciated

Iirc the two yellows go to the alternator output, green to earth and red to battery.

what bike ?

some hondas have dual or tripple coil alternator wiring....

there is 3 wires from the bikes alternator
pink,white, yellow.

Thats a dual coil alternator then i think.

what bike is it?

you can quite simply wire the alternator to the regrec, but i’d need to check a wiring diagram for the bike to be sure how to connectbyour three wires.

the purpose of the three wires is to allow either half or full alternator power depending upon whether the lights are on or not, but most people modify for full power all the time ( depending on the bike)

steve

Put that one on the shelf and ask Sonrier at SparckMoto.com to sell you a rectifier/regulator that will work straight out of the box.

teazer said:

Put that one on the shelf and ask Sonrier at SparckMoto.com to sell you a rectifier/regulator that will work straight out of the box.

Click to expand...

+1