1975 Yamaha RD350(LC) Preservation-mod Hellride

Head is back from the machine shop.

436470D2-1FBC-4740-AFA9-23EE37A1326D.jpeg

5D694D8C-4E81-4EEE-A910-CC8137027A18.jpeg
 
Another +1 for mototech. Chris is local to me and does all of my bore work as well. Very old school guy. Exceptional work, Prices are still outta the 80's and amazingly fast turn around most of the time.

Funny story, I used to live closer to an hour away from him.

I dropped off a set of GT250 Barrels for a bore job. I got home and 10 minutes after I pulled in the drive way he called me. They were done. Had I known, I'd have just stopped and gotten a sandwich lol

Its not always THAT fast though.
 
Another +1 for mototech. Chris is local to me and does all of my bore work as well. Very old school guy. Exceptional work, Prices are still outta the 80's and amazingly fast turn around most of the time.
He did the bore for my 360 to 378 conversion as well. I was surprised that he seemed to be familiar w/ it and had done others before.
 
He did the bore for my 360 to 378 conversion as well. I was surprised that he seemed to be familiar w/ it and had done others before.
He's done three 378 bores for me over the last 5 - 6 years. LOL
 
In all seriousness, work is killing me this fall. I’ve got some parts on order, and I’m slowly piecing things together. I ordered my first attempt at an electric water pump. Still may be too large, so I’m still searching for the best option with a very compact size. I also ordered carb manifolds for a larger carb from Economy. Im running TM32 carbs with YZ125 fiberglass reeds.

I’ve also begun the rad mounting. I’ll finish my adaptation of the seat this week, as well.

D574197B-5933-48F3-B033-A5CBBB7B9764.jpeg
4343BAFE-E51A-4DAF-BCE4-98A82914FCBC.jpeg

5172B19D-2848-4FF8-948B-A0B6745C23DA.jpeg
 
Started the glassing mods to the seat, which includes the cup to French the tail light.

CAB2D4BD-1553-49AD-9C7D-7D2EB9E2D312.jpeg
F26786F6-9856-42CD-B0EB-7F9E7325E0E3.jpeg
7C102420-7AF8-4FE2-86D4-C78D9B43BAB3.jpeg
 
Here’s the mostly finished seat. Ready for paint and primer over just the modified parts. Ain’t touching those graphics.

C730F57E-8790-4B09-BBBC-890337433352.jpeg
A2E9324A-40C4-47D7-B46C-093B0A7F37CB.jpeg
8948A935-9A19-484B-945A-40136C1588C8.jpeg
2A9737BA-4FE6-4813-8415-83F0ED74CDF5.jpeg
 
Looking good. Also, good call on the graphics. @adventurco installed those at garage brewed years ago while he was a half a shot from being blackout drunk. Haha
Screenshot_20211127-102122_Instagram.jpg
 
Back
Top Bottom