Recent content by Racethepilot

When I try and turn on any output that is wired to something the whole unit flashes nonstop.

Idk what has happened. Now I have disconnected everything and when I try to simply turn the headlight on the whole unit starts flashing and won’t stop.

Red / white going to the regulator has power Red going to the m unit has power Green red has nothing Yellow red has nothing

Alright. So wired the bike exactly like you said. Black to aux that gets power when bike is turned on. Green and red is grounded. When I hold the start button to cycle the starter the whole unit starts flashing and won’t stop flashing unless disconnected from the battery. Starter motor...

Red/ yellow has no power when bike is off. I have grounded the green red wire and still no luck. Any idea on the black wire?

Hey crew, Trying again. I have wired the m unit blue and the bike will not start. When I hit the starter button the bike makes a spark noise then the m unit flashes and shuts off. I have attached how the bike is currently wired. Any help would be appreciated.

Tried that too. When I bypass the switch the same thing happens where the m unit makes a spark noise and all the lights on the unit flash on then immediately the unit turn off.

Starter button is a motogadget m switch. I’m running the m button so the blue wire runs to one switch terminal and the other terminal has a wire that runs to the main ground

So just got back and wired it exactly like you specified, two starter wires spliced together (yellow/red) leading to the starter solenoid and I grounded the (green red) wire. When I hit the starter button the m unit made a spark noise and all of the lights on the unit cane on. Any idea what I...

Hey Crew, Recently installed the M-Unit Blue on my bike (1980 CB750k) and I can’t get the starter to turn over. All turn signals, lights, etc work but I’m stuck on the starter. I have attached a picture of my wiring diagram and need to know what I did wrong. The Green/ Red wire is where I...