Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Yes it feels good especially because I wanted to sort this LED stuff out before completing the bike. I now can sort out the aesthetics, install some new parts I got, and get new tires etc. Gettin' there...
Hello everyone !
I have a final update and it's fantastic news ! Thanks to all the help from you guys here I was able to complete the task and got the lights working :) I am beyond the moon ! it worked !
I made a quick vid to show folks :
This is fantastic thank you all very much once...
Thank you Teazer and thank you Benroloff. Those are both great explanations but I must admit that Benroloff's explanation made sense in my mind's eye. Sorry for the lack of update, I am also trying to bring back to life a 1985 RX7 FB and recently pulled the intake/carb on that and now am doing...
Thank you kindly Teazer you are really great for taking the time to explain.
Okay I will mull this over and attempt to do it as you described and come back with results for you folks. I have a long weekend so I hope to have time to do it. I really, really appreciate your assistance. I will also...
Please forgive me, I am an extremely visual learner bordering on disability so I need to try and visualize this via the wiring diagram.
Is this a correct interpretation of what you're saying I should do :
Describing the image above : I keep the black wire coming from the blue indicator bulb...
Okay I am embarrassed to say that the original wiring diagram with the explanation of how I wired in the diode was incorrect I had my wires mixed up (but according to the video it shouldn't matter). This is the correct wiring diagram and how it was done, the only difference is that I wired the...
I will get pictures tonight. The LED strip is causing confusion, it is not installed I am using the OEM lights right now. I only connected the LED strip as a test because I wondered if the rear brake light bulb was the cause. I wondered if maybe the LED strip had some diode in it or would...
Hmmm I don't think the previous owner messed up the wires, it all looks very OEM. This bike I have completely rebuilt down to the frame so I am familiar with the placement of the wires and the diagram but don't fully understand the concepts behind how it all works on a higher level. I have one...
Hi everyone,
So I can confirm that if I remove the dash bulb and try using the turning signals I get the exact same result; the rear stop light flashes and the right turning signals stay off. I forgot to disconnect the left side and see if right side works instead so apologies for that but I did...
Hello folks thanks for the replies that is much appreciated.
I used a pre-made diode kit that is meant for this and followed the exact instructions from this video :
I know 100% I did not splice into the rear light wiring. The rear light has 3 wires, one for the brake light switch (green...
Hello everyone,
Hopefully people with good electrical knowledge can help out. I have a 1982 Honda CB125s and it came with a 6V system. I am trying to complete a 12v conversion but ran into an issue with the turning signals. The bike has a 12v front light, 12v battery, 12v rectifier regulator...
Okay I think I have the final piece of info I need now.
So we can disregard the videos I posted above re: sound. Most of those bikes are out of spec too.
I contacted someone I knew had a lot of experience with CB125s as he has been selling 125cc bikes in the UK for over 30 years and has...
Hmmm I think you missed my latest reply but yeah it had no effect.
I'm now wondering if I'm crazy and the sound is normal or w/e idk. I went looking on youtube for 1981/82 CB125S idle sounds and some sound very thumpy with a lower speed idle of like 1000-1100 and this one at 1300 or so idle...
Okay so I am at a loss.
I took off the covers on the alternator side and inspected it and took some photos to show you what I can see. It appears I have the same cam chain tensioner as in the video from my first post.
I did my best to get the light in there: https://imgur.com/a/GwolWrk
So I...
Just to make sure I don't newb out and screw it all up.
I assume by crank bolt you mean this bolt here right ? (Not my engine just a pic from the internet) https://imgur.com/a/N7ZZFvr
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.