Search results

  1. F

    Picked up a complete 2000 gsxr600 non-inverted front end for $50. Any advantage?

    Hmmmmm I do already have a steering damper in the stockpile. What exactly would I need to run the gs500f rear wheel? Thanks!
  2. F

    Picked up a complete 2000 gsxr600 non-inverted front end for $50. Any advantage?

    Thanks for the fast reply! Looks like clamp offset is 34mm. Still looking for fork length. I’m trying to upload pics but image hosting isn’t working.
  3. F

    Picked up a complete 2000 gsxr600 non-inverted front end for $50. Any advantage?

    I’m back after 6 years. Medical school and a divorce kicked my ass but my cb500t is back on the chopping block. I was cruising craigslist yesterday and found a 2000 GSXR complete front end minus clip ons for $50. I didn’t ask questions. I just drove over to the guys place, asked if it was...
  4. F

    Was bored lastnight so I made a real working gun. P90 inside*

    Yea, its pretty damn accurate. Notice I didnt say 2" from the bulls-eye. Two inch groups locked into my bench mount.
  5. F

    So whats everybody look like?

    Guess Ill play. Work mode. Play mode. Funny, people cant really imagine me in the other role no matter which one they meet me in. :-\
  6. F

    cb500t-The Repsol"*NewPIcs again 2/5/11

    Re: PRESENTING THE NEW CB500T BUILD! damn this is going fast! I've been staring at my 500T for two years while its on the lift in the garage and you have managed to blow away my progress in two months. I did raise a kid and go through a year of medical school in that time though lol. Keep the...
  7. F

    Scored a Chrome bullet style 5" yellow glass 1960's light. Mounting? Thoughts?

    Yea, I figured it might end up on the rat rod eventually. When I start one lol.
  8. F

    Scored a Chrome bullet style 5" yellow glass 1960's light. Mounting? Thoughts?

    Found this in the trunk of a 1963 volvo in my local junkyard. Just sitting there minding its own business. God knows how long it sat in there. Snagged it for $5, brought it home and figured I would try and mount it on my bike but I cant figure out how to best mount it. Any ideas? A quick...
  9. F

    Made a few banners...

    Any chance I can get the file emailed to me? I recently bought a 18" plotter and have been playing with it to pass the time. Haven't really mastered designing anything in wizard though. I would LOVE to plot out one of these for each side of my gas tank! Thanks! Aserulneck@yahoo.com
  10. F

    Was bored lastnight so I made a real working gun. P90 inside*

    I have no idea how the law works up north but the general rule of thumb here is that firearms must all be registered according to their serial number. IE: Since the gun was purchased as a rifle and is registered as so it must meet the minimum length requirements for a rifle. In other words, If I...
  11. F

    1976 CB500T from Victoria, BC

    Love the bike! Identical to mine, gotta love that mocha color : ) Wish I had the balls to hack at my frame like that! Curious, did you bother to bump up the stock 145 main jets after adding the cone filters?
  12. F

    Was bored lastnight so I made a real working gun. P90 inside*

    ^ Do all of you PA guys travel in packs? Lol Im from Allentown and just posted up in the PA roll call. The mags insert from the bottom up right below the charging port. You cant really see from the pics. That was the point. No one at the range can tell the difference when I pull up, unzip my...
  13. F

    Alright PA crew, time for roll call!!!!

    What the heack, I get in one car accident and take a year off of DTT and theres a PA section? I've been on here for about three years now and was the first PA guy here. Back when it was me, the Candians, and the detroit boys. Damn! Checking in from Allentown currently but during the school...
  14. F

    Was bored lastnight so I made a real working gun. P90 inside*

    I hate to look like the gun nut American here but someone has to do it :-X I was bored lastnight and was staring at a old $30 p90 airsoft gun I had from when I was in HS. Well it occured to me that I had just recieved a coupon for $20 off of a Marlin 795 .22 rifle from Cabelas in the mail and...
  15. F

    Desperately need help tuning the carbs on my twin. Let me watch you work in ABE.

    My 500 twin is basically the very first old bike I have ever attempted to work on. I bought her in a box with a frame seperate and through trial and error have managed to make her a completely ridable bike. I was able to get the tune up measurements all in spec but just was looking for someone...
  16. F

    $1 side number plates.

    Currently at work but I can certainly have a couple up by 6 est. No numbers on the plates yet. But you can use your imaginantions. ;)
  17. F

    $1 side number plates.

    Since I had a huge dent in one of my air boxes I had it in the back of my mind that I wanted to either find a new metal cover or put number plates on the bike in replace of the metal side covers. Being lazy and cheap I knew if I waited long enough I would find some pre-cut piece of circular...
  18. F

    Fresh from my barn. CB500T content*

    Yea, I get pretty bored at work. That was taken with an Iphone and editted with the free mobile photoshop app. I had a stroke of genius yesterday and fabbed up a set of dollar stove element covers as number plates for the sides of the bike and those will be going on shortly all for $1 8)
  19. F

    Couple CB500T jetting questions and iginition questions. 12V coil Ohms? 150's?

    I have been working on one for over two years now on and off and had several questions which I have been looking for someone knowledgeable enough to ask. Any help you can lend would be great! -Running mufflers with very little back pressure and the stock airboxes I get a stumble on decel from...
Top Bottom