Search results

  1. Tim

    73 Honda ST90 - HELP NEEDED

    http://vintagehondaminitrails.com/item.php?id=32100-128-000 A few on eBay as well. https://www.ebay.com/itm/73-75-Honda-ST90-Main-Wiring-Harness-Loom-for-Trailsport-90/154382929893?epid=10016442841&hash=item23f1f08fe5:g:U~UAAOSwTz1eHi~q
  2. Tim

    73 Honda ST90 - HELP NEEDED

    Is your harness simply missing or just a mess?
  3. Tim

    DO THE TON BIKE OF THE MONTH - MARCH 2021 VOTING IS FINALLY OPEN!

    Post a pic and I'll update the one at the top
  4. Tim

    73 Honda ST90 - HELP NEEDED

    I don't have a harness, but you might try Sparck Moto http://www.sparckmoto.com/ What color is the bike? I've been restoring my ST90 (for my daughter) for a few years now. Not a full restoration, but fresh paint, some chrome, new rims and spokes etc. Engine might be done in another couple...
  5. Tim

    DO THE TON BIKE OF THE MONTH - APRIL 2021 NOMINATIONS OPEN

    DO THE TON BIKE OF THE MONTH Here are the Nomination Rules: Nominate one of our members' bikes for Bike of the Month - include up to 3 flattering pictures of the bike in question. This is an opportunity to recognize someone who's bike has inspired you. The Nomination must be accompanied by...
  6. Tim

    DO THE TON BIKE OF THE MONTH - MARCH 2021 VOTING IS FINALLY OPEN!

    Sorry it's been a cluster this last couple of weeks - in quarantine after returning from the US, which ironically has kept me away from this sort of thing. Anyhow - voting is open for a short quick shot at this! Looks like a great set of bikes to choose from this month.
  7. Tim

    Post a pic of your latest purchase

    Not sure - it's complicated as it's a Canadian bike and was never imported into the US. The only way to do that is to take it back to Canada and then bring it back across at a land crossing and import it at that point. It's doable, but I haven't looked into the process to import into the US...
  8. Tim

    Post a pic of your latest purchase

    Levi's F800 is a 2010 and was, IMHO, very reasonably priced compared to what many of us spend on our vintage jalopies. I'm hauling a friend's 2005 R1200ST back to Canada with me and will probably sell it for under $3K USD. Don't have to buy a 5 year old bike to get the modern conveniences, but...
  9. Tim

    MTD Trail Flite Hellride aka Fits of Glory

    Can't wait to see it ripping around. Sadly I wasn't able to give it any attention or get it to the Small Bore event.
  10. Tim

    Best place for custom bearings?

    I think the concern is the bearings should sit in their 'seat'. But, that being said, at least on Honda CB wheels one bearing floats - it doesn't get pressed in against a lip. Then there is a retaining ring that threads in and gets punched to lock in place against the hub. So it largely...
  11. Tim

    Looking to safety and emissions test on my old bike

    There shouldn't be any emissions needed - in 30 years of riding in Ontario I've never heard of emissions testing on a motorcycle. For a thorough safety, I can suggest you contact Tom at Cyclewerx. But they're up in the Junction area of Toronto (near where I live). Great shop - very...
  12. Tim

    Post a pic of your latest purchase

    Drive it as-is. Looks as good or better than many cars I see driving around SC.
  13. Tim

    DO THE TON BIKE OF THE MONTH - MARCH 2021 VOTING IS FINALLY OPEN!

    DO THE TON BIKE OF THE MONTH Our Nominees! Boet91 - 1999 Honda Sevenfifty chickenStripCharlie - 1983 Honda 750 Nighthawk jungalist - 1982 Honda CB750F Here are the Nomination Rules: Nominate one of our members' bikes for Bike of the Month - include up to 3 flattering pictures of...
  14. Tim

    DO THE TON BIKE OF THE MONTH - FEBRUARY 2021 WINNER!

    Sorry for the delays (again) folks. My work is getting super weird and crazy. Company I'm working for on a massive project was just bought by another company and the project I'm 20 months into with 18 to go is in limbo. Anyhow - will get voting up! Looks like some awesome bikes for a banner...
  15. Tim

    Hello from me !

    Welcome Josh - glad you found us and registered! There's a full Project section on the site here https://www.dotheton.com/index.php?forums/projects.48/ If you have an idea of where you're headed with the project in terms of full restoration, cafe racer etc. you can choose the appropriate area...
  16. Tim

    A nice Original dealer BMW engine stand for Air cooled twins.

    That is super cool - never seen one of those before. Wish I had an airhead engine on the bench. With those knurled nuts (similar to the nuts holding on an airhead tank) and overall quality/specificity, is it a BMW OEM tool? Gotta be a mark on it somewhere. BMW MOA folks might kill for it.
  17. Tim

    Post a pic of your latest purchase

    I got a gas tank in the mail once. Let's just say I'm glad it was wrapped up really, really well.
  18. Tim

    DO THE TON BIKE OF THE MONTH - FEBRUARY 2021 WINNER!

    DO THE TON BIKE OF THE MONTH Our Nominees: GoFarKid: 3 year Velocette rebuild Texasstar: Texas Two Step Taco johnu: Triumph tr5mx Build Here are the Nomination Rules: Nominate one of our members' bikes for Bike of the Month - include up to 3 flattering pictures of the bike in...
  19. Tim

    Post a pic of your latest purchase

    That's what I chopped up to make my XS cafe!
  20. Tim

    DO THE TON BIKE OF THE MONTH - JANUARY 2021 WINNER!

    The cold of winter is drying up our vote counts, but glad to see it was a close one!
Top Bottom